XCMG EBZ135 Boring Machine
Total weight:
43000kg
Total installed power:
135kW
Product Feature
The roadheader has shorter frame,lower center of gravity and stronger upgrade ability.
Cutting head adopts simulation technology to optimize the design,and the arrangement of picks on it is reasonable.All these make the machine has high cutting efficiency.
The adoption of straight structure on the first conveyor makes it smooth to connect with ramp board and unobstructed to convey.
The LCD displaies series of dynamic parameters and fault diagnosis.
Product Parameter
Project | Unit | Parameter |
Total weight | (kg) | 43000 |
Overall dimension | ||
Total length without additional conveyor | (mm) | 8932 |
Total width Ramp plate | (mm) | 2800/2400 |
Total width Main frame | (mm) | 2205 |
Total height The highest point of cutting head for laying horizontally | (mm) | 1862 |
Total height Main frame | (mm) | 1545 |
Undercut max telescoping/non-telescoping | (mm) | 400/200 |
Ground clearance of machine | (mm) | 180 |
Height Cutting cross section | (mm) | 4740/4350 |
WidthCutting cross section | (mm) | 4842/4670 |
Area Cutting cross section | (m²) | 23/20 |
Gantry height | (mm) | 420 |
Max./Economic compressure strength for cutting coal petrography | (MPa) | ≤70/60 |
Upgrade ability | (°) | ±18 |
Travel speed | (m/min) | 6 |
Minimum curve radius | - | 0.131 |
Average floor pressure | (MPa) | 225 |
Total installed power | (kW) | 135 |
Installed power of cutting motor | (kW) | 75 |
Installed power of pump motor | (kW) | AC660/1140 |
Supply voltage | (V) | 50 |
Line frequency | (Hz) | 38 |
Rotation speed of cutting head | (r/min) | 38 |
Loading capacity | (m³/min) | Star wheel type/4.32 |
Crawler width | (mm) | 520 |
Out width of crawlers | (mm) | 2205 |
Tensioning style | - | Cylinder tensioning and snap-gauge locking |
Pressure of water spraying | (MPa) | External spraying≥1.5;Internal spraying≥3 |
Max.non-removable parts size | (mm) | 3410×1380×1280 |
Max.non-removable parts mass | (kg) | 5340 |