| Engine |
| Engine model |
Cat C7.1 ACERT |
| Flywheel power |
114.0 kW |
| Cylinder bore |
105.0 mm |
| Stroke |
135.0 mm |
| Displacement |
7.1 l |
| Notice |
*Rated speed 2200 rpm |
| Maximum engine power - ISO 14396 |
139.0 kW |
| Maximum engine power - ISO 14396（DIN） |
139.0 kW |
| Maximum engine power - SAE J1995 |
141.0 kW |
| Discharge |
Meets China's third emission standard for non-road countries and the United States EPA Tier 3/European Union Stage IIIA Equivalent emission standards |
| Maximum net power - ISO 9249/SAE J1349 |
130.0 kW |
| Maximum net power - ISO 9249/SAE J1349（DIN） |
130.0 kW |
| Rated net power* – ISO 9249/SAE J1349 |
114.0 kW |
| Rated net power* – ISO 9249/SAE J1349（DIN） |
114.0 kW |
| Gearbox |
| 1.0 forward |
3.3 km/h |
| 2.0 forward |
5.8 km/h |
| 3.0 forward |
10.1 km/h |
| 1.0 reverse |
4.2 km/h |
| 2.0 reverse |
7.3 km/h |
| 3.0 reverse |
12.5 km/h |
| 1.5 Forward gear* |
4.2 km/h |
| 2.5 Forward gear* |
7.3 km/h |
| 1.5 Reverse* |
5.2 km/h |
| 2.5 Reverse* |
7.3 km/h |
| Maintenance refill capacity |
| Fuel tank |
299.0 l |
| Cooling system |
30.0 l |
| Engine crankcase |
15.5 l |
| Power train |
160.0 l |
| Final drive（Each） |
7.0 l |
| Hydraulic oil tank |
29.5 l |
| Weight |
| Operating weight |
16032.0 kg |
| Job – D5R2 LGP（VPAT） |
18504.0 kg |
| Job – D5R2 XL（A） |
17003.0 kg |
| Job – D5R2 XL（SU） |
16119.0 kg |
| Job – D5R2 XL（VPAT） |
16032.0 kg |
| Shipment – D5R2 LGP（VPAT） |
16999.0 kg |
| Shipment – D5R2 XL（A） |
15351.0 kg |
| Shipment – D5R2 XL（SU） |
13862.0 kg |
| Shipment – D5R2 XL（VPAT） |
14714.0 kg |
| Blade |
| A XL – Capacity（SAE J1265） |
3.18 m³ |
| A XL – Width |
4165.0 mm |
| SU XL – Capacity（SAE J1265） |
4.28 m³ |
| SU XL – Width |
3154.0 mm |
| VPAT LGP – Capacity（SAE J1265） |
3.16 m³ |
| VPAT LGP – Width |
4080.0 mm |
| VPAT XL – Capacity（SAE J1265） |
3.18 m³ |
| VPAT XL – Width |
3272.0 mm |
Size - Approximation：LGP
|
| From grouser tip to ROPS（Cab or canopy）Height of the machine |
3086.0 mm |
| Machine height from grouser tip to exhaust pipe |
2979.0 mm |
| When the following tooling is included，Increase：Multiple Shank Ripper（The tips of the teeth are located on the ground） |
1230.0 mm |
| When the following tooling is included，Increase：Drawbar |
192.0 mm |
| Basic Tractor Length |
3480.0 mm |
| Ground contact length of track |
2611.0 mm |
| Height of ground rack bar |
66.0 mm |
| Bulldozer width - Trunnions are not included（Standard shoe width） |
2490.0 mm |
| Bulldozer width - Includes a trunnion |
2640.0 mm |
| Bulldozer gauge |
1890.0 mm |
| Drawbar height（Grouser tips to U Clamp center） |
621.0 mm |
| Ground clearance |
394.0 mm |
| When the following tooling is included，Increase：SU Shovel |
Not applicable |
| When the following tooling is included，Increase：VPAT Shovel（Straight shovel/Angle shovel 25 degrees） |
1249.0 mm |
Size - Approximation：XL
|
| When the following tooling is included，Increase：A Shovel（Straight shovel/Angle shovel 25 degrees） |
1450 mm/2303 mm（57.1"/90.7"） |
| When the following tooling is included，Increase：SU Shovel |
1546.0 mm |
| When the following tooling is included，Increase：VPAT Shovel（Straight shovel/Angle shovel 25 degrees） |
1343 mm/1965 mm（52.9"/77.4"） |
