GEHL RT175 GEN:3 Track Loaders
Rated Operating Capacity at 35% Tipping Load (kg):
1,650 lbs. (748)
Gross Power (kW):
68.4 hp (51.0)
Lift Height (mm):
119" (3038)
Product Feature
Controls on the Gehl RT175 GEN:3 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
- Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
- Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
- Standard, selectable 2-speed drive motors, horn and backup alarm.
- Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
- Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
- Multi-purpose LCD display provides easy readout during operation.
- Single button allows simple scrolling and selection of various display functions.
- Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
- Joystick Sensitivity
- Position Reaction
- Engine Response
- AntiStall
- Pump Swash Plate Position
The RT175 GEN:3 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
- Automatic glow module engine intake heating system provides superior cold-weather starting.
- Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
The robust lift-arm on the RT175 GEN:3 Compact Track Loader is designed for optimal strength, visibility and capacity.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Product Parameter
| Height to Hinge Pin - Fully Raised (mm) | 128" (3251) |
| Make/Model | Yanmar/4TNV98C-NMSL Tier 4 |
| Type | 4-Stroke Naturally Aspirated |
| Displacement/Cylinders (L) | 203 cu.in. (3.3)/4 |
| Gross Power (kW) @ rpm | 69.9 hp (52.1) @ 2500 |
| Net Power (kW) @ rpm | 68.4 hp (51) @ 2500 |
| Peak Torque (Nm) @ rpm | 179 ft.-lbs. (242.7) @ 1600 |
| Oil Pump Capacity (L) | 11 qts. (10.4) |
| Alternator Voltage/Amperage | 14V/95A |
| Auxiliary Hydraulic Flow - Rated Speed (L/min) | 18.5 gpm (70.0) |
| Hight-Flow Hydraulic Flow - Rated Speed (L/min) | 34.0 gpm (128.8) |
| Transmission Pump Type | Axial Piston |
| Motor Type | Axial Piston with Planetary Gear Box Reduction |
| Height to Hinge Pin - Fully Raised (mm) | 128" (3251) |
| Reach - Fully Raised (mm) | 34.5" (876) |
Dimensions |
|
|---|---|
| A Overall Operating Height - Fully Raised | 168" |
| B Height to Hinge Pin - Fully Raised | 128" |
| C Reach - Fully Raised | 34.5" |
| D Dump Angle - Fully Raised | 40.2° |
| E Dump Height - Fully Raised | 98" |
| F Maximum Rollback Angle - Fully Raised | 102.5° |
| G Overall Height at ROPS | 83" |
| H Overall Length with Bucket - Standard Counterweight | 144.0" |
| I Overall Length without Bucket - Standard Counterweight | 110.8" |
| J Specified Height | 67.5" |
| K Reach at Specified Height | 31.1" |
| L Dump Angle at Specified Height | 75° |
| M Maximum Rollback Angle at Ground | 30° |
| N Carry Position | 8.2" |
| O Maximum Rollback Angle at Carry Position | 31.6° |
| P Digging Position - Below Ground | +0.9" |
| Q Angle of Departure with Standard Counterweight | 30.4° |
| R Ground Clearance | 13.3" |
| S Track Gauge | 51.7" |
| T Track Shoe Width | 12.6" |
| U Crawler Base | 54.8" |
| V Overall Width - Less Bucket | 64.4" |
| W Bucket Width | 65.9" |
| X Clearance Radius - Front With Bucket | 91.4" |
| Z Clearance Radius - Rear with Standard Counterweight | 62.1" |
| Maximum Rollback at Specified Height | 66.8° |
| Angle of Approach | 90° |
| Grouser Height | 1" |
Capacity |
|
| Operating Capacity at 35% Tipping Load | 1,750 lbs. |
| Operating Capacity at 50% Tipping Load | 2,500 lbs. |
| Tipping Load | 5,000 lbs. |
| Operating Weight | 8,605 lbs. |
Engine |
|
| Make/Model | Yanmar/4TNV98C-NMSL Tier IV |
| Type | 4-Stroke Naturally Aspirated |
| Displacement/Cylinders | 203 cu.in./4 |
| Gross Power @ rpm | 69.9 hp @ 2500 |
| Net Power @ rpm | 68.4 hp @ 2500 |
| Peak Torque @ rpm | 179 ft.-lbs. @ 1600 |
| Oil Pump Capacity | 11 qts. |
| Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
| Drawbar Pull/Tractive Effort | 9,917 lbs. |
| Track Type/Track Rollers/Roller Type | Rubber/4/Steel |
| Track Width | 12.6" |
| Ground Pressure | 6.2 psi |
Forces |
|
| Bucket Breakout - Tilt Cylinder | 5,354 lbs. |
| Bucket Breakout - Lift Cylinder | 5,016 lbs. |
| Ground Speed - Single Speed | 5.3 mph |
| Ground Speed - Two Speed | 7.7 mph |
Volume |
|
| Fuel Tank | 24 gal. |
| Hydraulic Reservior Tank | 11.0 gal. |
| Coolant Capacity | 3.5 gal. |
Hydraulics |
|
| Auxiliary Hydraulic Flow - Rated Speed | 18.5 gpm |
| High-Flow Hydraulic Flow - Rated Speed | 34.0 gpm |
| Transmission Pump Type | Axial Piston |
| Motor Type | Axial Piston with Planetary Gear Box Reduction |
Electronic System |
|
| Battery Volts | 12V |
| Cold Cranking Amps at Temperature | 850 CCA @ 0°F |
Dimensions |
|
|---|---|
| A Overall Operating Height - Fully Raised | 4267 mm |
| B Height to Hinge Pin - Fully Raised | 3251 mm |
| C Reach - Fully Raised | 876 mm |
| D Dump Angle - Fully Raised | 40.2° |
| E Dump Height - Fully Raised | 2489 mm |
| F Maximum Rollback Angle - Fully Raised | 102.5° |
| G Overall Height at ROPS | 2103 mm |
| H Overall Length with Bucket - Standard Counterweight | 3658 mm |
| I Overall Length without Bucket - Standard Counterweight | 2814 mm |
| J Specified Height | 1715 mm |
| K Reach at Specified Height | 790 mm |
| L Dump Angle at Specified Height | 75° |
| M Maximum Rollback Angle at Ground | 30° |
| N Carry Position | 208 mm |
| O Maximum Rollback Angle at Carry Position | 31.6° |
| P Digging Position - Below Ground | 23 mm |
| Q Angle of Departure with Standard Counterweight | 30.4° |
| R Ground Clearance | 333 mm |
| S Track Gauge | 1313 mm |
| T Track Shoe Width | 320 mm |
| U Crawler Base | 1392 mm |
| V Overall Width - Less Bucket | 1636 mm |
| W Bucket Width | 1674 mm |
| X Clearance Radius - Front With Bucket | 2322 mm |
| Z Clearance Radius - Rear with Standard Counterweight | 1577 mm |
| Maximum Rollback at Specified Height | 66.8° |
| Angle of Approach | 90° |
| Grouser Height | 25 mm |
Capacity |
|
| Operating Capacity at 35% Tipping Load | 794 kg |
| Operating Capacity at 50% Tipping Load | 1134 kg |
| Tipping Load | 2268 kg |
| Operating Weight | 3903 kg |
Engine |
|
| Make/Model | Yanmar/4TNV98C-NMSL Tier IV |
| Type | 4-Stroke Naturally Aspirated |
| Displacement/Cylinders | 3.3 L/4 |
| Gross Power @ rpm | 52.1 kW @ 2500 |
| Net Power @ rpm | 51 kW @ 2500 |
| Peak Torque @ rpm | 242.7 Nm @ 1600 |
| Oil Pump Capacity | 10.4 L |
| Alternator Voltage/Amperage | 14V/95A |
Track Drives |
|
| Drawbar Pull/Tractive Effort | 4,498 kg |
| Track Type/Track Rollers/Roller Type | Rubber/4/Steel |
| Track Width | 320 mm |
| Ground Pressure | 0.43 bar |
Forces |
|
| Bucket Breakout - Tilt Cylinder | 2429 kg |
| Bucket Breakout - Lift Cylinder | 2275 kg |
| Ground Speed - Single Speed | 8.5 km/hr |
| Ground Speed - Two Speed | 12.4 km/hr |
Volume |
|
| Fuel Tank | 91 L |
| Hydraulic Reservior Tank | 41.6 L |
| Coolant Capacity | 13.3 L |
Hydraulics |
|
| Auxiliary Hydraulic Flow - Rated Speed | 70.0 L/min |
| High-Flow Hydraulic Flow - Rated Speed | 128.8 L/min |
| Transmission Pump Type | Axial Piston |
| Motor Type | Axial Piston with Planetary Gear Box Reduction |
Electronic System |
|
| Battery Volts | 12V |
| Cold Cranking Amps at Temperature | 850 CCA @ -18°C |
Performance |
|
|---|---|
| All-Tach® Mounting System | Standard |
| IdeaTrax™ | Exclusive Standard |
| Straight Tracking | Standard |
| Power-A-Tach® Mounting System | Optional |
| Self-Leveling Hydraulic Lift Action | Standard |
| Selectable Self-Leveling Lift Action | Optional |
| Two-Speed Drive | Standard |
| 12-Volt Battery | Standard |
Engine |
|
| Engine Alert System with Error Display | Standard |
| Engine Automatic Shutdown System | Standard |
| Grid/Manifold Heater Starter Assist | Standard |
| Dual-Element Air Cleaner with Indicator | Standard |
Hydraulic System |
|
| Auxiliary Hydraulics | Standard |
| High-Flow Auxiliary Hydraulics | Optional |
Undercarriage |
|
| Elevated Planetary Final Drives | Standard |
| Maintenance Free Rollers Each Side | 3 |
| Single Flange Front/Dual Flange Rear Idlers | Standard |
| Rubber Track Undercarriage System | Standard |
| Servo-Controlled Hydrostatic Drive | Standard |
| Dedicated Undercarriage | Standard |
Structure |
|
| Tilt-out Foot Pod | Exclusive Standard |
| Back-up Alarm | Standard |
| Combination Radiator & Hydraulic Oil Cooler | Standard |
| ROPS/FOPS Level II Overhead Guard | Standard |
| Anti-Vandalism Lock Provisions | Standard |
| Mechanical Lift Cylinder Lock | Standard |
Operator's Station |
|
| Pressurized Cab Enclosure with A/C | Optional |
| Fold-Up Door | Optional |
| Multi-Function Function Display Screen | Standard |
| Drive Sensitivity Adjustment | Standard |
| Electronic Attachment Control - 14-Pin Connector | Optional |
| Electro-Hydraulic Joystick Controls | Standard |
| Selectable Control Pattern Configuration | Optional |
| Variable Speed Control, Selectable On & Off | Optional |
| Foot Throttle | Standard |
| Full-Suspension Seat | Standard |
| Air Suspension Seat | Optional |
