Product Feature
◆The best in the world
ZYJ1260BKIt is the world's largest guided hole static pile driver.。
◆Advanced construction method
The guide hole type static pile driver adopts a middle digging guide hole.+Static pressure method，The pile can be pressed after the hole is introduced，Or driving the hole and pressing the pile at the same time.。
◆Energy saving and environmental protection
Simple equipment construction process，And that pile quality is good，High efficiency，The construction site is environmentally friendly，The cost is low。
◆Overhead large-diameter long drum winch
Meet the single-layer rope arrangement in the working state of full drilling depth，Effectively reduce the extrusion and friction of the wire rope，The service life of the steel wire rope is greatly prolonged.。
◆Follow-up lowering of main winch
During hole guiding operation，As the drilling tool goes deeper into the ground，The wire rope of the main winch hanging the drill pipe can be continuously and automatically lowered，No manual operation is required。
Product Parameter
Model |
Unit |
ZYJ1060BK |
|
Overall dimensions |
Job leader |
mm |
16470 |
Working width |
mm |
9160 |
|
Transport is high |
mm |
3300 |
|
Maximum pile driving force |
tf |
1060 |
|
Minimum pile-pressing speed |
m/min |
0.36 |
|
Maximum pile-pressing speed |
m/min |
9.45 |
|
Walking ability |
Longitudinal travel |
m |
3.6 |
Lateral travel |
m |
0.7 |
|
Corner |
° |
5 |
|
Lifting stroke |
m |
1.1 |
|
Crane as standard |
|
QY35 Telescopic arm |
|
Maximum lifting length of middle pile |
m |
23 |
|
Ground specific pressure |
Long ship |
Kpa |
150 |
Short ship |
Kpa |
198 |
|
Max. round pile jaws available |
mm |
1000 |
|
Maximum square pile jaw can be configured |
mm |
800 |
|
Optional pile-clamping box |
|
8038/10016 |
|
Torque of power head |
KNm |
160 |
|
Power head speed |
rpm |
7-40 |
|
Apply pressure/Lifting power |
tf |
21 |
|
Maximum guide hole depth |
m |
30 |
|
