Global-CE > Forklift Loader > GEHL Forklift Loader > GEHL RS5-19 GEN:3 Telescopic Handlers
GEHL  RS5-19 GEN:3 Telescopic Handlers

GEHL RS5-19 GEN:3 Telescopic Handlers

Rated Lift Capacity (kg):
6,600 lbs. (2994)
Gross Power (kW):
120 hp (89)
Maximum Lift Height (m):
42' 0" (12.8)
View Complete Details

Product Feature

The RS5-19 GEN:3 is built to work hard. 

  • Compact size 5' 11" wide & 6' 4" tall
  • Total weight of 10,000 lbs
  • With a ground clearance of 14"
  • Two section telescopic boom has full hydraulic power for all lift and telescopic functions
  • Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised.
  • Inboard wet-disc service brakes
  • Limited slip differential is located on front axle.
  • Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab

To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator’s station.


Engine

The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently.

  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
  • Rexroth 2-speed hydrostatic transmission.
  • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.

The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance.

Pump Type Gear
Total Capacity (L/min) 20 gpm (83)
System Pressure (bar) 3,350 psi (231)
Hydraulic Reservoir Capacity (L) 18 gal. (68)

Attachments

There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 50" (1270 mm) wide.
D Truss Boom- 5' long.
E Bucket - Light Material - 71" wide.
RS Attachments


Serviceability

Gehl RS5-19 Crane Service Access

The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance.

  • The engine hood lifts fully out of the way, providing easy access to the battery and engine maintenance
  • A hinged access door provides easy access to the engine oil drain
  • Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for extra protection
  • A protective sleeve over the exhaust pipe increases safety when working on the engine
  • A dual-element air filter protects the engine from airborne contaminants

Product Parameter

System Pressure (bar) 3,350 psi (231)
Hydraulic System Total Capacity (L/min) 20 gpm (83)
Manufacturer Yanmar
Model 4TNV98C Tier IV
Power (kW) 69 hp (50.1)
Maximum Travel Speed (km/hr) 15 mph (24)
Rated Speed 2,500 rpm
Pump Type Gear
Total Capacity (L/min) 20 gpm (83)
System Pressure (bar) 3,350 psi (231)
Hydraulic Reservoir Capacity (L) 18 gal. (68)
A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 50" (1270 mm) wide.
D Truss Boom- 5' long.
E Bucket - Light Material - 71" wide.

Capacities

Lift Capacity 5,500 lbs.
Maximum Lift Height 19'1"
Capacity at Maximum Lift Height 3,000 lbs.
Maximum Foward Reach 11'0"
Capacity at Maximum Forward Reach 1,850 lbs.
Maximum Reach Below Grade 0"

Load Chart

A 5,500 lbs.
B 4,000 lbs.
C 3,000 lbs.
D 2,000 lbs.
E 1,850 lbs.

Engine

Manufacturer Yanmar
Power 69 hp
Aspiration Natural
Model 4TNV98C Tier IV
Rated Speed 2500 rpm

Components

Transmission Rexroth 2-speed
Maximum Travel Speed 15 mph
Selective Steering 4-wheel
2-wheel
Crab
Brakes 2-Wheel Hydraulically Actuated Internal Wet-Disc Brake
Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer Dana

Hydraulic System

Pump Type Gear
Total Capacity 20 gpm
System Pressure  3350 psi
Hydraulic Reservoir Capacity 18 gal.

General Specifications

Approximate Weight 10,000 lbs.
Length 12'4"
Width 5'11"
Ground Clearance 14"
Wheelbase 7'6"
Turning Radius 11'0"
Overall Height 6'4"
Frame Leveling N/A
Fuel Capacity 17 gal. 

Tire Options

12.00 x 16.5 Bias/10 PR
12.00 x 16.5 Bias/10 PR Foam-Filled
12.00 x 16.5 Solid Rubber

Capacities

Lift Capacity 2495 kg
Maximum Lift Height 5.8 m
Capacity at Maximum Lift Height 1361 kg
Maximum Foward Reach 3.4 kg
Capacity at Maximum Forward Reach 840 kg
Maximum Reach Below Grade 0 mm

Engine

Manufacturer Yanmar
Power 50.1 kW
Aspiration Natural
Model 4TNV98C Tier IV
Rated Speed 2500 rpm

Components

Transmission Rexroth 2-speed
Maximum Travel Speed 24 km/hr
Selective Steering 4-wheel
2-wheel
Crab
Brakes 2-Wheel Hydraulically Actuated Internal Wet-Disc Brake
Parking Brake Spring-Applied, Hydraulic Release (SAHR) on Front Axle
Axle Manufacturer Dana

Hydraulic System

Pump Type Gear
Total Capacity 76 L/min
System Pressure  231 bar
Hydraulic Reservoir Capacity 68 L

General Specifications

Approximate Weight 4536 kg
Length 3.8 m
Width 1.80 m
Ground Clearance 350 mm
Wheelbase 2.29 m
Turning Radius 3.35 m
Overall Height 1.93 m
Frame Leveling N/A
Fuel Capacity 64 L

Tire Options

12.00 x 16.5 Bias/10 PR
12.00 x 16.5 Bias/10 PR Foam-Filled
12.00 x 16.5 Solid Rubber

Send Inquiry

Connect with GEHL
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT
Connect with GEHL
I want quotes for
Email ID
Your Country is
Please select
Name
Phone Number
- -
SUBMIT

Related products that may lnterest you

Forklift Loader related brands

Copyright Notice © 2002-2024 global-ce.com