Product Feature
Environmental protection Environmental protection
● Double-layer rubber seal is used between the dustbin and the filler.,Meanwhile, a sewage diversion device is arranged at the sealing position.,Sewage can be diverted into the sewage tank.,The problem of secondary pollution caused by sewage leakage is effectively eliminated.。
● The filler cover completely covers the filler feed opening.,Eliminate the phenomenon of flying garbage and dust caused by airflow disturbance at the tail of the vehicle in the transfer process.。
Efficient Super Efficient
● Bi-directional compression technology,High garbage compression ratio,Compressed domestic waste can reach 600~800Kg/m³Above。
● The volume of the filling hopper is large,High loading and filling efficiency,Feeding cycle time is less than 10s。
Intelligence Intelligence
● Use reliable controller,Write a specific logic control program to ensure that the operation instructions are executed in sequence.,High system maintainability and reliability。
● Optional multimedia real-time monitoring system,Monitor the compaction、Loading、Unloading and reversing rear view information,Protect the safety of vehicle operation。
Characteristic
● Main component dustbin、Shovel、The filler and other parts in contact with the garbage are made of high-strength weather-resistant steel or wear-resistant steel.,The overall performance of the structure is outstanding,Strong corrosion resistance and wear resistance。
● Advanced hydraulic lifting safety circuit is adopted.,During packer lift,Even if the tubing bursts,The packer will not suddenly fall down to cause a serious accident.,And that use safety is improve.。In the course of use,At the same time, it is equipped with a safety stay bar to provide double protection.,And is safer and more reliable。
● The engine power output control, namely the throttle control, is fully automatically controlled by the electrical system.,Ensure that the garbage truck is in its various operating state,The engine can automatically select the acceleration and idling state.,Power loss and system heating are avoided,Fuel consumption is reduced,The economy is good。
● The operation control boxes are respectively installed in the cab and at the rear of the vehicle.,The job control box in the cab controls the shoving and the selection of the operating mode,The operation control box at the tail of the vehicle controls the operations of the pressing and filling mechanism and the bucket lifting mechanism,Very convenient to use and operate;Especially in landfills.,Operators can complete unloading without getting off the vehicle.。
● Optional installation of different turning barrels(Dou)Agency:240LAnd 660LStandard plastic barrel、300LStandard round iron drum、600LAnd 800LSmall iron bucket with the car、Sealed and covered garbage buckets and large garbage buckets, etc.。
● The side guardrail is made of aluminum alloy profiles.,The overall appearance is beautiful,But also can realize full recovery.,Eliminate waste of resources and environmental pollution。
Product Parameter
Compaction cycle time |
≤17s |
Feeding cycle time |
≤10s |
Volume of sewage tank |
340L |
Overall dimensions(LongxWidexHigh)(Turnover type) |
6960×2200×2570mm |
Discharge Cycle Time |
≤45s |
Chassis brand |
Jiangling(CountryV) |
Maximum total mass |
8200kg |
Control mode |
Automatic、Manual |
Effective volume of dustbin |
6.2m³ |
Engine power |
112kW |