Engine
|
| Engine model |
Cat C175-16 |
| Total power - SAE J1995 |
1976.0 kW |
| Torque reserve |
20.0 % |
| Cylinder bore |
175.0 mm |
| Stroke |
220.0 mm |
| Displacement |
85.0 l |
| Net power |
1848.0 kW |
| Net power - SAE J1349 |
1848.0 kW |
Weight - Approximation
|
| Chassis weight |
122300.0 kg |
| Body weight range |
26862-47627 kg（59220-105000 lb） |
Operating specifications
|
| Nominal payload capacity |
226.8 ton (US) |
| Top speed - Fully loaded |
60.0 km/h |
| Steering angle |
36.0 degrees |
| Circle clearance diameter |
33.0 m |
| Total operating weight of the machine |
386 007 or 390089. kg（85 1000 or 860000. lb） |
| Turning diameter - Front |
28.0 m |
Final drive
|
| Differential gear ratio |
1.8:1 |
| Planetary gear ratio |
16:1 |
| Total reduction ratio |
28.8:1 |
Gearbox
|
| First gear forward |
12.9 km/h |
| Second gear forward |
17.4 km/h |
| Third gear forward |
23.8 km/h |
| Fourth gear forward |
32.1 km/h |
| Fifth gear forward |
43.6 km/h |
| Sixth gear forward |
60.0 km/h |
| Go backwards |
11.8 km/h |
Suspension system
|
| Effective cylinder stroke – Front |
130.5 mm |
| Effective cylinder stroke – Rear |
105.5 mm |
| The rear axle swings |
±4.9 degrees |
Body lift system
|
| Pump flow - High idle |
846.0 l/min |
| Relief valve setting - Rise |
20370.0 kPa |
| Body raise time - High idle |
19.0 seconds |
| Body down time - Float |
20.0 seconds |
| Body power is reduced - High idle |
17.5 seconds |
Brake
|
| Outside diameter |
874.5 mm |
| Braking area - Rear brake |
34500.0 cm² |
| Standard |
J-ISO 3450 JAN88、ISO 3450:1996 |
| Braking area - Front brake |
89817.0 cm² |
Weight distribution - Approximation
|
| Front axle - Fully loaded |
33.0 % |
| Front axle - No load |
48.0 % |
| Rear axle - Fully loaded |
67.0 % |
| Rear axle - No load |
52.0 % |
Capacity - Double Bevel - 100% Fill factor
|
| Stacking（SAE 2:1） |
159-190 m3（209-250 yd3） |
| Paperback |
112-142 m3（146-186 yd3） |
Maintenance refill capacity
|
| Cooling system |
1074.0 l |
| Braking/Lifting system（Including the fuel tank） |
1315.0 l |
| Torque converter/Transmission oil sump |
102.0 l |
| Torque converter/Transmission system（Includes an oil sump） |
209.0 l |
| Rear axle housing |
984.0 l |
| Crankcase |
312.0 l |
| Fuel tank |
2839.0 l |
| Fuel tank（Optional） |
4922.0 l |
| Steering system（Including the fuel tank） |
290.0 l |
ROPS
|
| ROPS Standard |
Standard |
Noise
|
| Noise standard |
Standard |
Turn
|
| Steering Standard |
SAE J15111 OCT90，ISO 5010:1992 |
