Engine
|
| Engine model |
Cat® C15 ACERT™ |
| Rated engine speed |
1700.0 turn/Minutes |
| Total power - SAE J1995 |
384.0 kW |
| Net power - SAE J1349 |
356.0 kW |
| Net power - ISO 9249 |
356.0 kW |
| Net power - 80/1269/EEC |
365.0 kW |
| Net power - ISO 14396 |
379.0 kW |
| Net Torque - SAE J1349 |
2486.0 N·m |
| Number of cylinders |
6 |
| Cylinder bore |
137.0 mm |
| Stroke |
171.0 mm |
| Displacement |
15.2 l |
Weight - Approximation
|
| Target Total Machine Operating Weight |
71214.0 kg |
| Target Total Machine Weight |
71214.0 kg |
| Chassis weight |
25378.0 kg |
| Body weight |
7850.0 kg |
Operating specifications
|
| Nominal Payload Level（100%） |
38.2 metric tons |
| Top speed - Fully loaded |
73.7 km/h |
| Target payload capacity |
38.2 metric tons |
| Maximum Payload Level（110%） |
42.0 metric tons |
| Payload not to be exceeded（120%） |
50.4 metric tons |
| Body capacity（SAE 2:1） |
25.2 m² |
Gearbox
|
| First gear forward |
11.9 km/h |
| Second gear forward |
16.3 km/h |
| Third gear forward |
22.2 km/h |
| Fourth gear forward |
29.8 km/h |
| Fifth gear forward |
40.4 km/h |
| Sixth gear forward |
54.4 km/h |
| Seventh gear forward |
73.7 km/h |
| Go backwards |
14.2 km/h |
Final drive
|
| Differential gear ratio |
1.92:1 |
| Planetary gear ratio |
4.80:1 |
| Total reduction ratio |
9.26:1 |
Brake
|
| Braking area - Front brake |
1395.0 cm² |
| Braking area - Rear brake |
40225.0 cm² |
| Brake standard |
ISO 3450:1996 |
Body lift system
|
| Pump flow - High idle |
448.0 l/min |
| Relief valve setting - Rise |
18950.0 kPa |
| Relief valve setting - Descend |
3450.0 kPa |
| Body raise time - High idle |
7.5 seconds |
| Body down time - Float |
10.0 seconds |
| Body power is reduced - High idle |
10.0 seconds |
Weight distribution - Approximation
|
| Front axle - No load |
49.0 % |
| Front axle - Fully loaded |
34.0 % |
| Rear axle - No load |
51.0 % |
| Rear axle - Fully loaded |
66.0 % |
Suspension system
|
| Cylinder front stroke at no load |
234.0 mm |
| Cylinder rear stroke at no load |
149.0 mm |
| The rear axle swings |
8.9 degrees |
Maintenance refill capacity
|
| Fuel tank |
530.0 l |
| Cooling system |
125.0 l |
| Crankcase |
64.0 l |
| Differential and final drives |
180.0 l |
| Steering tank |
55.0 l |
| Steering system（Including the fuel tank） |
87.0 l |
| Braking/Raise the hydraulic tank |
145.0 l |
| Braking/Lifting system |
227.0 l |
| Torque converter/Transmission system |
64.0 l |
| DEF Box |
21.0 l |
Tire
|
| Standard Tyre |
18.00R33（E4） |
ROPS
|
| ROPS Standard |
Caterpillar Provided ROPS（Roll-over protection structures）The cab is in line ISO 3471:2008 ROPS Standard。 |
| FOPS Standard |
FOPS（Falling Objects Protective Structure，Anti-falling object protective structures）Conform ISO 3449:2005 Level II FOPS Standard。 |
Noise
|
| Noise standard (1) |
Work for a long time with the operator station and cab open，Or when working in a noisy environment，Hearing protection may be required。 |
| Noise standard (2) |
According to ISO 6395:Tests specified in 2008，The exterior sound pressure power level measured for the standard machine is 116 dB（A）。 |
| Noise standard (3) |
Use ISO 6396:At the time of measurement in 2008，The operator equivalent sound pressure level is 79 dB（A），Adopt EU 74 for soundproofing dB（A）。 |
Turn
|
| Steering Standard |
ISO 5010:2007 |
| Steering angle |
40.5 degrees |
| Turning diameter - Front |
17.6 m |
| Circle clearance diameter |
20.3 m |
Size
|
| To ROPS The height of the top |
3857.0 mm |
| Overall body length |
8199.0 mm |
| Inside body length |
5635.0 mm |
| Total length |
8796.0 mm |
| Wheelbase |
3960.0 mm |
| Distance between rear axle and tail |
2586.0 mm |
| Ground clearance |
518.0 mm |
| Unloading clearance |
506.0 mm |
| Loading height - No load |
3147.0 mm |
| Maximum Inside Body Depth |
1404.0 mm |
| Overall height with body raised |
8255.0 mm |
| Working width |
4780.0 mm |
| Width between center lines of front tire |
3110.0 mm |
| Engine guard clearance |
335.0 mm |
| Outside width of body |
3931.0 mm |
| Inside body width |
3627.0 mm |
| Front headliner height |
4114.0 mm |
| Rear axle clearance |
548.0 mm |
| Width between center lines of rear dual tire |
2536.0 mm |
| Overall tire width |
3693.0 mm |
Capacity – Flat bottom – 100% Fill factor
|
| Stacking 2:1（SAE） |
25.2 m² |
| Paperback |
17.6 m² |
