Engine
|
| Engine model |
Cat® C32 ACERT™ |
| Total power - SAE J1995 |
765.0 kW |
| Net power - SAE J1349 |
704.0 kW |
| Net power - 80/1269/EEC |
704.0 kW |
| Net power - ISO 9249 |
704.0 kW |
| Cylinder bore |
146.0 mm |
| Stroke |
162.0 mm |
| Displacement |
32.1 l |
| Net Torque |
5286.0 N·m |
| Engine power - ISO 14396 |
755.0 kW |
| Engine speed |
1800.0 turn/Minutes |
| Peak torque speed |
1200.0 turn/Minutes |
| Cylinder |
12 |
Weight - Approximation
|
| Target Total Machine Weight |
164654.0 kg |
Operating specifications
|
| Nominal Payload Level（100%） |
90.8 ton (US) |
| Top speed - Fully loaded |
67.1 km/h |
| Payload not to be exceeded（120%）* |
109.0 ton (US) |
| Maximum effective load（110%） |
99.8 ton (US) |
| Nominal payload（100%） |
90.8 ton (US) |
| Body capacity - SAE 2:1 |
64.1 m³ |
Gearbox
|
| First gear forward |
10.9 km/h |
| Second gear forward |
14.8 km/h |
| Third gear forward |
20.1 km/h |
| Fourth gear forward |
27.2 km/h |
| Fifth gear forward |
36.9 km/h |
| Sixth gear forward |
49.4 km/h |
| Seventh gear forward |
67.1 km/h |
| Go backwards |
12.4 km/h |
Final drive
|
| Differential gear ratio |
2.736:1 |
| Planetary gear ratio |
7.0:1 |
| Total reduction ratio |
19.1576:1 |
Brake
|
| Brake standard |
ISO 3450:1996 |
| Braking surface area - Rear brake |
102116.0 cm² |
| Braking area - Front brake |
40846.0 cm² |
Body lift system
|
| Pump flow - High idle |
458.0 l/min |
| Relief valve setting - Rise |
18950.0 kPa |
| Relief valve setting - Descend |
3450.0 kPa |
| Body raise time - High idle |
15.0 seconds |
| Body down time - Float |
13.0 seconds |
| Body down time - High idle |
13.0 seconds |
Weight distribution - Approximation
|
| Front axle - No load |
46.0 % |
| Front axle - Fully loaded |
33.0 % |
| Rear axle - No load |
54.0 % |
| Rear axle - Fully loaded |
67.0 % |
Suspension system
|
| The rear axle swings |
5.4 degrees |
| Cylinder front stroke at no load |
74.7 mm |
| Cylinder rear stroke at no load |
66.0 mm |
Maintenance refill capacity
|
| Fuel tank (1) |
1136.0 l |
| Cooling system |
228.0 l |
| Steering system（Including the fuel tank） |
53.6 l |
| Braking/Lifting system |
322.0 l |
| Brake lift system（Including the fuel tank） |
444.0 l |
| Torque converter/Transmission system |
138.5 l |
| Differential |
227.0 l |
| Crankcase |
109.0 l |
| Fuel tank (2) |
1325.0 l |
| Final drive（Each） |
76.0 l |
Tire
|
| Standard Tyre |
27.00R49（E4） |
ROPS
|
| ROPS/FOPS Standard |
Standard |
Noise
|
| Noise standard |
Standard |
Turn
|
| Turning diameter - Front |
25.3 m |
| Steering Standard |
SAE J1511 FEB94 ISO 5010:1992 |
| Steering angle |
30.5 degrees |
| Circle clearance diameter |
28.4 m |
Capacity - Coal Hopper - 100% Fill factor
|
| According to SAE 2:1 Stowage criteria，Loading density less than 950 kg/m3（1600 lb/yd3）When the material is |
126.0 m³ |
| For material density 1040-1160 kg/m3（1750-1950 lb/yd3）Yes SAE 2:1 |
106.0 m³ |
| For material density 1160 kg/m3（1950 lb/yd3）Yes SAE 2:1 |
89.0 m³ |
| For material density 950-1040 kg/m3（1600-1750 lb/yd3）Yes SAE 2:1 |
110.0 m³ |
Capacity - X Type a body - 100% Fill factor
|
| Stacking 2:1（SAE） |
60.2 m³ |
| Paperback |
41.9 m³ |
