Engine
|
| Engine model |
Cat C32 ACERT |
| Cylinder bore |
145.0 mm |
| Stroke |
162.0 mm |
| Displacement |
32.1 l |
| Notice (1) |
Power rating for 1750 rpm under specified conditions as required by the specified standard rpm Test conditions at。 |
| Notice (2) |
Ratings are based on SAE J1995 Standard Air Conditions：Temperature 25°C（77°F），Air pressure 100 kPa（29.61 Hg）。 Power is based on the following condition：Fuel at 16°C（60°F）Time API The degree is 35，The lower calorific value of fuel oil is 42780. kJ/kg（18390 BTU/lb），And the engine operating temperature is 30°C（86°F）。 |
| 1300 rpm Net torque at |
4757.0 N·m |
| Net power - SAE J1349 |
708.0 kW |
| Net torque reserve |
23% |
| Engine power - ISO 14396 |
749.0 kW |
| Engine speed |
1750.0 turn/Minutes |
| Total power - SAE J1995 |
758.0 kW |
| Cylinder |
12 |
| Discharge (1) |
In line with the United States EPA Tier 2 Equivalent Emission Standard。 |
| Discharge (2) |
Certified by China's third emission standard for non-road countries。 |
| Notice (3) |
Altitude up to 3048 m（10000'）The engine can still maintain its rated power.。 |
Operating specifications
|
| Nominal Payload Level（100%） |
97.98 ton (US) |
| Top speed - Fully loaded |
65.9 km/h |
Gearbox
|
| First gear forward |
10.7 km/h |
| Third gear forward |
19.8 km/h |
| Fifth gear forward |
36.2 km/h |
| Seventh gear forward |
65.9 km/h |
| Notice |
Equipped with standard 27.00R49（E4）Maximum travel speed of the tire。 |
| Reverse first gear |
12.1 km/h |
Final drive
|
| Differential gear ratio |
2.74:1 |
| Planetary gear ratio |
7.00:1 |
| Total reduction ratio |
19.16:1 |
Brake
|
| Brake standard |
ISO 3450:2011 |
| Front OCDB Braking surface area |
40846.0 cm² |
| Front caliper braking surface area |
2787.0 cm² |
| Braking area - Rear brake |
102116.0 cm² |
Body lift system
|
| Pump flow – High idle |
491.0 l/min |
| Body raise time – High idle |
15.0 seconds |
Weight distribution - Approximation
|
| Front axle – No load/Fully loaded |
44%/30% |
| Rear axle – No load/Fully loaded |
56%/70% |
Suspension system
|
| The rear axle swings |
5.4° |
| Effective cylinder stroke – Front |
318.0 mm |
| Effective cylinder stroke – Rear |
165.0 mm |
Maintenance refill capacity
|
| Fuel tank |
1140.0 l |
| Cooling system |
212.0 l |
| Torque converter/Brake/Lift Hydraulic Tank |
385.0 l |
| Transmission system |
122.0 l |
| Differential |
222.0 l |
| Crankcase |
113.5 l |
| Final drive（Each） |
42.0 l |
| Steering system（Including the fuel tank） |
59.0 l |
Tire
|
| Standard Tyre |
27.00R49（E4） |
ROPS
|
| ROPS |
Caterpillar Roll-over protection structure provided（ROPS，Rollover Protective Structure）The cab is in line ISO 3471:2008 Operator Seat Standard and ISO 13459:2012 Trainer Seat Standard。 |
| FOPS |
Anti-falling object protective structures（FOPS，Falling Objects Protective Structure）Conform ISO 3449:2005 Operator Seat Standard and ISO 13459:2012 II Level FOPS Trainer seat standard。 |
Noise
|
| Noise standard |
ISO 6393:2008、SAE J1166:2008 |
Turn
|
| Steering Standard |
ISO 5010:2007 |
| Steering angle |
30.5° |
| Turning diameter - Front wheel |
25.3 m |
| Circle clearance diameter |
28.4 m |
Capacity — X Type a body — 100% Fill factor
|
| Stacking 2:1（SAE） |
60.1 m³ |
| Paperback |
42.1 m³ |
Size（Approximation）– X Type a body
|
| Width between center lines of front tire |
4163.0 mm |
| Overall width of front tire |
4961.0 mm |
| Front headliner height - Load |
5177.0 mm |
| Unloading clearance |
890.0 mm |
| Engine guard clearance |
864.0 mm |
| Width between center lines of rear dual tire |
3576.0 mm |
| Distance between rear axle and tail |
3045.0 mm |
| Rear axle clearance |
902.0 mm |
| Working width |
6105.0 mm |
| Total length |
10004.0 mm |
| Total height - The body is raised |
10050.0 mm |
| Working width of the extended walkway |
6545.0 mm |
| Ground clearance |
896.0 mm |
| To ROPS The height of the top - Load |
4730.0 mm |
| Loading height - No load |
4380.0 mm |
| Inside body width |
5200.0 mm |
| Inside body length |
6870.0 mm |
| Maximum Inside Body Depth |
1895.0 mm |
| Outside width of body |
5524.0 mm |
| Overall body length |
9555.0 mm |
| Overall tire width |
5262.0 mm |
| Wheelbase |
4570.0 mm |
| Overall width of headliner |
6056.0 mm |
Weight：X Type a body – Without backing plate
|
| Target payload |
98202.0 kg |
| Target Total Machine Weight |
163360.0 kg |
| Unloaded operating weight |
65158.0 kg |
| Weight of the body system |
16070.0 kg |
