Komatsu 960E-2K ELECTRIC TRUCKS
Product Feature
Castings Used in High Stress Areas
To increase frame reliability, steel castings have been incorporated at key frame pivot points and key load bearing critical portions of the frame. This includes the rear body pivot and horsecollar sections.
Electric Dynamic Retarder
The 4620 kW 6,196 HP retarding system provides stateof-the-art braking capacity for navigating today’s mining operations which contain steep continuous descents and sharp switchbacks.
Ergonomically designed cab
The Komatsu 960E-2 cab design provides a comfortable and productive environment to meet today’s mining demands. The cab includes tinted windows, heating and air conditioning, acoustical insulation, double sealed doors, and provides filtered and pressurized air.
Fully Hydraulic Controlled Multiple-Disc Wet Brakes
Although the dynamic retarding system is the primary braking force, the 960E-2 comes standard with four-wheel, hydraulically actuated, oil cooled service brakes. In the event that the truck’s hydraulic system pressure drops below an acceptable level, accumulator tanks will automatically apply all wheel brakes to bring the truck to a complete stop.
Hill Start
An innovative feature the Komatsu drive system provides is the Hill Start logic. This built in functionality will help reduce rollback in the event of a stop while the truck is ascending a ramp. Additionally, the feature automatically controls the braking function when an operator that is stopped on grade wants to continue up the ramp.
Hydropneumatic suspension
Hydrair II® is a suspension system that utilizes four nitrogen-over-oil cylinders. This suspension system is designed to maximize machine productivity by providing the operator with a smooth and comfortable ride. By absorbing shocks to the chassis during operation, Hydrair II® contributes to the durability of the machine’s frame and components.
Komatsu AC Drive
Our Komatsu AC drive is designed to provide the reliability and highest quality from Komatsu. Held to the highest standards, the transmission was subjected to extensive testing and quality confirmation, both on the bench and in the field. A full scale bench durability test was conducted during development to evaluate design quality prior to production. By using planetary design, extensive machining is not required during a standard rebuild.
Komatsu Drive
Field tested in the toughest applications, Komatsu Drive is a unique system that features:
Komatsu SSDA18V170 High Horsepower Engine
Komatsu’s SSDA18V170 engine was designed and developed by Industrial Power Alliance (IPA) technical joint venture between Komatsu and Cummins®. This 2610 kW 3,500 HP engine will operate in most of today’s mining applications without experiencing power derate. Fuel efficiency is maximized due to optimized air handling with two-stage turbocharging. A standard pre-lube system is designed to eliminate start-up wear and increase overhaul life.
Propulsion/Retard Speed Control
Propulsion/Retard Speed Control allows the operator to set a desired speed. This function monitors the speed of each wheel independently for immediate adjustments in propulsion or retarding effort in order to maintain the desired speed.
Structurally Enhanced Frame Design
By using advanced computer-aided design, finite element analysis, and full-scale dynamic and static testing, the frame has been designed to carry 327 tonne 360 short tons and provides the highest structural reliability from Komatsu.
Tight Turning Radius
By using double acting hydraulic steering cylinders with a six-point articulation linkage, the 960E-2K power steering system provides steering control with minimal operator effort. The turning radius of the 960E-2K is 16 m 52' 6", which provides excellent maneuverability for tight loading and dumping conditions. The steering accumulators comply with ISO-5010 standards.
Traction (Spin-Slide) Control
During slippery conditions, the 960E-2K wheel traction control technology detects and corrects wheel spin or slide events. Traction Control operates automatically and independently of the service brakes, providing a means of controlling the machine in slippery conditions.
Body
Floor sheet 200,000 psi / 1379 mPa tensile strength steel / Outer |
0.63'' | 16 mm |
Floor sheet 200,000 psi / 1379 mPa tensile strength steel / Center |
0.75'' | 19 mm |
Front sheet 200,000 psi / 1379 mPa tensile strength steel / Outer |
0.39' | 10 mm |
Front sheet 200,000 psi / 1379 mPa tensile strength steel / Center |
0.47'' | 12 mm |
Side sheet 200,000 psi / 1379 mPa tensile strength steel |
0.39' | 10 mm |
Canopy sheet 100,000 psi / 690 mPa tensile strength steel |
0.24'' | 6 mm |
Capacity struck | 195 yd3 | 149 m3 |
SAE heaped 2:1 | 280 yd3 | 214 m3 |
Standard Komatsu body weight | 90,000 lb | 40823 kg |
Braking System
Traction system | Wheel Spin-Slide Control | |
Max. service apply pressure | 2750 psi | 18960 kPa |
Total friction area per brake | 16,078 in2 | 103729 cm2 |
Secondary brakes | Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements. | |
Wheel brake locks | Switch activated | |
Parking brakes | Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on +-15% grade at maximum gross vehicle weight | |
Electric dynamic retarder | 6,196 HP | 4620 kW |
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse. |
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab (ISO 3449), adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering column, electric windshield wipers w/washer, tinted glass, power windows, Payload Meter III, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank.
Electrical System
4 x 8D 1450 CCA, 12 volt, in series/parallel, bumper-mounted with disconnect switch.
Electric Drive
AC/DC CURRENT | ||
Drive System*. | Komatsu AC Drive | |
Alternator | Siemens | |
Dual Fan Main Blower: | ||
Alternator Flow | 9,380 cfm | 266 m3/min |
Wheel Motor Flow | 14,800 cfm | 419 m3/min |
Control | IGBT AC Torque Control System | |
Ratio | 38.12 | |
Speed (maximum) | 40 mph | 64.5 km/h |
* Drive system performance depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure acceptable application. |
Engine
Make and model* | Komatsu SSDA18V170 | |
Fuel | Diesel | |
Number of cylinders | 18 | |
Operating cycle | 4 cycle | |
Gross horsepower** @ 1900 rpm | 3,500 HP | 2610 kW |
Net flywheel power*** @ 1900 rpm | 3,346 HP | 2495 kW |
Weight (wet) | 25,897 lb | 11750 kg |
Weight (dry) | 24,795 lb | 11250 kg |
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America. | ||
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer’s approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump. | ||
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions. |
Frame
Plate material tensile strength steel |
70,000 psi | 482.6 mPa |
Casting material tensile strength steel |
90,000 psi | 620.5 mPa |
Rail width | 12'' | 305 mm |
Rail depth (minimum) | 34'' | 864 mm |
Top and bottom plate thickness | 1.77'' | 45 mm |
Side plate thickness / Rear | 0.98'' | 25 mm |
Side plate thickness / Front | 1.26'' | 32 mm |
Drive axle mounting | Pin and spherical bushing | |
Drive axle alignment | Swing link between frame and axle |
Hydraulic System
Steering | Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator. | |
Turning circle diameter (SAE) | 105' | 32 m |
Reservoir | 250 U.S. gal | 947 L |
Filtration | In-line replaceable elements | |
Suction | Single, full flow, 100 mesh | |
Hoist and steering | Dual, in-line, high pressure | |
Brake component cabinet | Above deck, easily accessible with diagnostic test connections | |
Hoist | Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening | |
Hoist times: | ||
Power-up loaded | 24 sec | |
Power-down | 14 sec | |
Float-down empty | 24 sec | |
Pumps | Two pumps, single package, in-line | |
Hoist and brake cooling | Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi | |
Steering and brake | Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi | |
System relief pressures: | ||
Hoist and brake cooling | 2,500 psi | 17237 kPa |
Steering and brake | 3,000 psi | 20685 kPa |
Ports available for powering disabled truck and for system diagnostics. |
Service Capacities
Cooling System | 190 U.S. gal | 719 L |
Crankcase | 90 U.S. gal | 341 L |
Hydraulic system | 350 U.S. gal | 1325 L |
Motor gear box (each) | 37 U.S. gal | 140 L |
Fuel tank | 1400 U.S. gal | 5300 L |
Suspension
Variable rate hydro-pneumatic with integral rebound control
Product Parameter
Floor sheet 200,000 psi / 1379 mPa tensile strength steel / Outer |
0.63'' | 16 mm |
Floor sheet 200,000 psi / 1379 mPa tensile strength steel / Center |
0.75'' | 19 mm |
Front sheet 200,000 psi / 1379 mPa tensile strength steel / Outer |
0.39' | 10 mm |
Front sheet 200,000 psi / 1379 mPa tensile strength steel / Center |
0.47'' | 12 mm |
Side sheet 200,000 psi / 1379 mPa tensile strength steel |
0.39' | 10 mm |
Canopy sheet 100,000 psi / 690 mPa tensile strength steel |
0.24'' | 6 mm |
Capacity struck | 195 yd3 | 149 m3 |
SAE heaped 2:1 | 280 yd3 | 214 m3 |
Standard Komatsu body weight | 90,000 lb | 40823 kg |
Traction system | Wheel Spin-Slide Control | |
Max. service apply pressure | 2750 psi | 18960 kPa |
Total friction area per brake | 16,078 in2 | 103729 cm2 |
Secondary brakes | Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements. | |
Wheel brake locks | Switch activated | |
Parking brakes | Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on +-15% grade at maximum gross vehicle weight | |
Electric dynamic retarder | 6,196 HP | 4620 kW |
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse. |
Radiator frontal area | 75.5 ft2 | 7.02 m2 |
Alternator | 24 volt, 250 amp | |
Lighting | 24 volt | |
Cranking motors | Two/24 volt |
AC/DC CURRENT | ||
Drive System*. | Komatsu AC Drive | |
Alternator | Siemens | |
Dual Fan Main Blower: | ||
Alternator Flow | 9,380 cfm | 266 m3/min |
Wheel Motor Flow | 14,800 cfm | 419 m3/min |
Control | IGBT AC Torque Control System | |
Ratio | 38.12 | |
Speed (maximum) | 40 mph | 64.5 km/h |
* Drive system performance depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu must analyze each job condition to assure acceptable application. |
Make and model* | Komatsu SSDA18V170 | |
Fuel | Diesel | |
Number of cylinders | 18 | |
Operating cycle | 4 cycle | |
Gross horsepower** @ 1900 rpm | 3,500 HP | 2610 kW |
Net flywheel power*** @ 1900 rpm | 3,346 HP | 2495 kW |
Weight (wet) | 25,897 lb | 11750 kg |
Weight (dry) | 24,795 lb | 11250 kg |
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America. | ||
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer’s approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump. | ||
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions. |
Plate material tensile strength steel |
70,000 psi | 482.6 mPa |
Casting material tensile strength steel |
90,000 psi | 620.5 mPa |
Rail width | 12'' | 305 mm |
Rail depth (minimum) | 34'' | 864 mm |
Top and bottom plate thickness | 1.77'' | 45 mm |
Side plate thickness / Rear | 0.98'' | 25 mm |
Side plate thickness / Front | 1.26'' | 32 mm |
Drive axle mounting | Pin and spherical bushing | |
Drive axle alignment | Swing link between frame and axle |
Steering | Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator. | |
Turning circle diameter (SAE) | 105' | 32 m |
Reservoir | 250 U.S. gal | 947 L |
Filtration | In-line replaceable elements | |
Suction | Single, full flow, 100 mesh | |
Hoist and steering | Dual, in-line, high pressure | |
Brake component cabinet | Above deck, easily accessible with diagnostic test connections | |
Hoist | Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening | |
Hoist times: | ||
Power-up loaded | 24 sec | |
Power-down | 14 sec | |
Float-down empty | 24 sec | |
Pumps | Two pumps, single package, in-line | |
Hoist and brake cooling | Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi | |
Steering and brake | Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi | |
System relief pressures: | ||
Hoist and brake cooling | 2,500 psi | 17237 kPa |
Steering and brake | 3,000 psi | 20685 kPa |
Ports available for powering disabled truck and for system diagnostics. |
Cooling System | 190 U.S. gal | 719 L |
Crankcase | 90 U.S. gal | 341 L |
Hydraulic system | 350 U.S. gal | 1325 L |
Motor gear box (each) | 37 U.S. gal | 140 L |
Fuel tank | 1400 U.S. gal | 5300 L |
Max. front stroke | 12.92'' | 328 mm |
Max. rear stroke | 9.40'' | 239 mm |
Max. rear axle oscillation | ±6.5° |
Rock service, tubeless, radial tires | ||
Standard tire* | 56/80 R63 | |
Flange mount rim: | ||
Rim assembly | 41'' x 63'' x 5.5'' | 1041 mm x 1600 mm x 140 mm |
Rims rated at 758 kPa / 110 psi cold inflation pressure. | ||
Typical tire weight | 65,154 lb | 29553 kg |
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc. |
Empty vehicle weight: | ||
Front Axle Distribution / 49.5% | 272,250 lbs | 123490 kg |
Rear Axle Distribution / 50.5% | 277,750 lbs | 125985 kg |
Total EVW | 550,000 lbs | 249475 kg |
Gross vehicle weight: | ||
Front Axle Distribution / 33% | 419,100 lbs | 190104 kg |
Rear Axle Distribution / 67% | 850,900 lbs | 385968 kg |
Nominal GVW | 1,270,000 lbs | 576072 kg |
Nominal Payload | 720,000 lbs (360 short tons) | 326585 kg (327 metric tons ) |
Nominal payload is defined by Komatsu America Corp’s payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application. | ||
The figures above are provided for basic product description purposes. | ||
Please contact your Komatsu distributor for specific application requirements. |