CASE CX33C MINI EXCAVATORS

Among the most popular size classes for mini excavators, the CX33C is designed to provide the digging performance (6,900 lbf.) and depth (nearly 10 feet) of a larger excavator while retaining the distinct advantages of a zero tailswing machine. Greater track shoe width improves tractive effort and increases lift capacities, and many of the productivity-boosting features that contractors count on come standard. Other options include a hydraulic quick coupler and steel tracks for even greater bite and performance on rocky or varying terrain. Purpose-Built Productivity The C Series provides more features and functions that drive productivity than any previous CASE mini excavators. Auxiliary hydraulics allow for easy thumb and attachment setup, Automatic 2-Speed Travel provides smother travel across varied terrain, and a push blade assists in backfilling and improves digging stability – all standard. The adjustable boom can be offset to either side, which combined with a zero tailswing design, allows the CX33C to dig alongside buildings or in confined areas without fear of damaging the machine or environment. Plus, at just under 7,400 lb., the CX33C is capable of being transported without special licensing or towing equipment* making it a powerful and simple addition to any fleet. *Always check vehicle capacities and state or local laws for applicable roading regulations and requirements. Common-Sense Fuel Efficiency The efficient 25-hp engine, combined with standard auto-idle functionality and a maintenance-free Tier 4 Final solution, provides excellent performance and fuel economy with no additional operator involvement. There is no fuel-burning regeneration, no particulate filter to replace and no exhaust fluid to add. Simply operate as normal. CASE Comfort and Visibility A four-post ROPS/FOPS canopy provides a spacious operator environment with unobstructed sightlines of the bucket, trench, tracks and over the rear counterweight. An adjustable seat, ergonomic joysticks with proportional controls, and a pattern selector help improve operator comfort and control. Simple Serviceability The CX33C, like all C Series minis, features quick and easy access to maintenance items. Two side-by-side panels allow for convenient ground-level access to gauges, fill ports, grease points, filters and main service items. OPERATOR ENVIRONMENT Travel alarm TRACK OPTIONS Tracks: Steel Tracks 12 in (300 mm) OTHER Thumb bracket Hydraulic quick coupler provision Hydraulic coupler Klac coupler Mechanical coupler Hydraulic hammer Beacon 2nd auxiliary circuit Steel Tracks Base & Extended Warranty Coverage 2yr/3,000 hours Full machine limited warranty Purchased Protection Purchased Protection Plan is an extension of the factory base and extended coverage is available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

ENGINE

• Yanmar 3TNV88F-ESHYB
• Engine access under rear hood
• Glow plug starting aid
• Dry type air cleaner with restriction indicator

ELECTRICAL

• 12-volt electrical starting system
• Heavy-duty battery
• Battery Master Switch
• Key Start
• Anti-Theft-Engine starting passwords
• Front working light
• 12 V power outlet
• Auto idle feature with on/off switch
• Horn
• Pre-wired - Telematics ready

HYDRAULICS

• Auxiliary hydraulics – single/bi-directional – and plumbing to arm
• Large hydraulic oil cooler
• Control pattern selector valve
• Cylinder rod protection covers – Dozer, Boom

OPERATOR ENVIRONMENT

• ROPS/FOPS four post canopy
• ISO 6396:2008 sound pressure level LpA=75bB (A)
• Pilot operated hand controls and foot pedals
• Adjustable seat w/seat belt
• Arm rests
• 12V socket
• Display includes:
  • Engine oil pressure warning lamp
  • Battery charging warning lamp
  • Engine preheat pilot lamp
  • Engine coolant temp warning lamp
  • Air cleaner warning lamp
  • Overload warning lamp
  • Travel speed pilot lamp
  • Fuel low level warning lamp
  • Hyd. quick coupler lock lamp
  • Engine coolant temp gauge
  • Fuel gauge
  • Hour meter

TRACK DRIVE

• Rubber tracks
• Automatic 2-speed travel
• Fully hydrostatic drive system
• Sealed and lubricated track rollers
• Track tension adjustment – grease type

UPPER STRUCTURE

• Zero tail swing
• Standard arm: 4 ft 3 in (1.3 m)
• Bucket linkage with lifting hook

OTHER

• Swing boom – 75° left /50° right
• Hydraulic backfill blade
• Additional counterweight adds 286 lb (130 kg)

WARRANTY

• Base warranty coverage: 2-Year/3,000-Hour Full Machine Limited Warranty