Product Feature
Wide range
High——The maximum height of the hinge point of the arm head can reach 19.3 meters,Maximum grip height up to 16.8 meters,Horizontal field of view up to 6.2 meters;
Far——Grab material up to 19.6 meters;
Deep——Down to a maximum depth of 11.9 meters。
High efficiency
Hurry up——The fastest rotation speed can reach 8 revolutions in 1 minute.,Minimum working time of 1 working cycle is as low as half a minute.;
Full——Maximum bucket capacity up to 5m³,The production efficiency of loading and unloading operation can reach 520t/h,It can load 13 vehicles and carry 40 in an hour.tThe truck;
Strong——Grasping ability of main working area is 10% higher than that of the same type of product%Above。
Low fuel consumption
Province——Adopt Kawasaki“Positive flow”System and Sany's independent research and developmentDOMCSIntegrated control system,Fuel consumption is 10% lower than that of other brands with the same tonnage%;
Light——Lightweight design,Optimize the structure design,Lighter and stronger;
Excellent——Adopt SANY classic 365 excavator platform,Automatic identification of dynamic power according to load changes,Adjust the engine speed,Output power self-adapting load condition variation,Ffectively reduce energy consumption。
Product Parameter
Power system |
Engine brand |
Isuzu |
Engine power |
212kW/2000rpm |
|
Engine Torque |
1080Nm/1500rpm |
|
Engine emissions |
ⅢPhases |
|
Fuel tank capacity |
540L |
|
Travel system |
Running gear |
SANY |
Working gauge |
3800mm |
|
Wheel spacing |
4100mm |
|
Track width |
700mm |
|
Hydraulic system |
Kawasaki positive flow system |
|
Control Room |
Lifting structure form |
Single four-bar linkage lifting mechanism |
Cab lift height |
2650mm |
|
Boom |
Boom configuration |
k11 |
Boom |
7m Arm |
|
Maximum working radius |
10.5m |
|
Maximum working height |
12.0m |
|
Maximum working depth |
-3.0m |
|
Theoretical load at maximum radius(Includes a gripper) |
6.2t |
|
Boom configuration |
k14 |
|
Boom |
8.6m Arm |
|
Maximum working radius |
13.5m |
|
Maximum working height |
15.0m |
|
Maximum working depth |
-4.5m |
|
Theoretical load at maximum radius(Includes a gripper) |
4.5t |
|
Boom configuration |
k16 |
|
Boom |
8.6m Arm |
|
Maximum working radius |
15m |
|
Maximum working height |
16.5m |
|
Maximum working depth |
-7.4m |
|
Theoretical load at maximum radius(Includes a gripper) |
3.6t |
|
Boom configuration |
k17 |
|
Boom |
9.6m Arm |
|
Maximum working radius |
16.5m |
|
Maximum working height |
16.5m |
|
Maximum working depth |
-7.6m |
|
Theoretical load at maximum radius(Includes a gripper) |
3.4t |
|
Boom configuration |
k18 |
|
Boom |
10.5m Arm |
|
Maximum working radius |
17.8m |
|
Maximum working height |
18.0m |
|
Maximum working depth |
-7.8m |
|
Theoretical load at maximum radius(Includes a gripper) |
3.4t |
|
Grab configuration |
Type of bulk material |
Scrap,Steel scrap、Rubber |
Density |
1t/m³ |
|
Grab type |
Plum blossom grab |
|
Model |
SLM1000 |
|
Grapple volume |
1m³ |
|
Grab weight |
2.12t |
|
Work efficiency |
200~240t/h |
|
Type of bulk material |
Ultra-light density material,Fertilizer、Feed |
|
Density |
0.6t/m³ |
|
Grab type |
Shell grab |
|
Model |
SLS5006 |
|
Grapple volume |
5m³ |
|
Grab weight |
2.97t |
|
Work efficiency |
300~350t/h |
|
Type of bulk material |
Light density material,Coal |
|
Density |
0.8t/m³ |
|
Grab type |
Shell grab |
|
Model |
SLS3508 |
|
Grapple volume |
3.5m³ |
|
Grab weight |
2.77t |
|
Work efficiency |
280~320t/h |
|
Type of bulk material |
Medium density material,Sand、Gravel |
|
Density |
1.6t/m³ |
|
Grab type |
Shell grab |
|
Model |
SLS2525 |
|
Grapple volume |
2.5m³ |
|
Grab weight |
2.42t |
|
Work efficiency |
360~440t/h |
|
Type of bulk material |
Heavy density material,Iron ore |
|
Density |
2.4t/m³ |
|
Grab type |
Shell grab |
|
Model |
SLS2525 |
|
Grapple volume |
1.5m³ |
|
Grab weight |
2.34t |
|
Work efficiency |
300~360t/h |
|
Type of bulk material |
Log,3mLong |
|
Density |
0.8t/m³ |
|
Grab type |
Log grab |
|
Model |
SWY2000 |
|
Grapple volume |
2m³ |
|
Grab weight |
2.06t |
|
Work efficiency |
260~300t/h |