Ammann APH 100-20VIBRATORY PLATES
Machine weight:
675 kg
Max. vibration frequency:
40 Hz
Max. centrifugal force:
100 kN
Product Feature
- Electric starter
- Hydrostatic three-shaft exciter system for power and climbing
- Air-cooled Hatz diesel engine with low oil pressure protection system
- Hydraulic pump for hydrostatic drive and steering; no V belt required
- Ergonomic guide handle with hydrostatic orbital steering
- Easy access to all service points
- Optimised base plate for well-balanced operation
- Available with ACEecon, compaction control system
Product Parameter
APH 100-20 | ||
---|---|---|
Weights & Dimensions | Metric | US |
Machine weight basic unit | 675 kg | 1499 lb |
with extension plates 75 mm | 704 kg | 1554 lb |
with extension plates 150 mm | 727 kg | 1609 lb |
A = Base plate length | 520 mm | 20,5 in |
B = Machine length | 1070 mm | 42,1 in |
C = with handle | 1965 mm | 77,4 in |
D = Machine heigth | 900 mm | 35,4 in |
E = Handle height (work) | 1000 mm | 39,4 in |
F = Handle height (transport) | 1500 mm | 60,8 in |
G = Machine width | 650 mm | 26 in |
H = with extension plates | 800/950 mm | 31/37 in |
Engine | ||
Engine | Hatz 1D90S | Hatz 1D90S |
Fuel | Diesel | Diesel |
Engine Output | 14,8 HP / 10,9 kW | 14,8 HP / 10,9 kW |
at RPM | 2900 | 2900 |
Fuel consumption | 2,5 l/h | 0,6 gal /h |
Compaction Forces | ||
Max, Vibration frequency | 40 Hz | 2400 vpm |
Max, Centrifugal force | 100 kN | 22 lbf |
Working surface basic unit | 1090 m2/h | 11733 ft2/h |
with extensions | 1350/1600 m2/h | 14531/17222 ft2/h |
Max. compaction depth * | 100 cm | 22 in |
Miscellaneous | ||
Speed | 28 m/min | 1 mph |
Tank capacity | 10 l | 2,2 gal |
Gradeability | 0,36 | 0,36 |
Max. incline to all sides | 30° | 30° |
* depending on ground conditions |