SANY RTG5203 Customized Container Cranes
Product Feature
New torque anti-sway system(1)
Through proper arrangement of guide pulleys in the horizontal and vertical direction, the movement of the four wire ropes can effectively prevent the swing of the spreader, greatly improving container hoisting efficiency.
New torque anti-sway system(2)
The new-developed four rope anti-sway system (Patent number: ZL201220568248.4) effectively achieve bidirectional anti-sway of the spreader. This system allows a ±250mm movement of spreader in the gantry or trolley direction, greatly improving container hoisting efficiency.
Container Auto-tracking and auto-hoisting system
Based on the data stored from the mechanism positions and the containers on the yard as well as database management automatic tracking operation and the most optimized tracking control of the mechanisms can be realized, increasing the working efficiency and ensuring safety
Soft landing of spreader onto the container
Software intelligent deceleration technology and hardware inspection protection device are applied to adjust the time and position of deceleration dynamically. This helps decrease crush and wheel load, thus increasing service life and stability of the crane.
Intelligent rectification technology of gantry
Deflection of bogie relative to the rail is detected in real-time as the control signal for the transducer to control motor speed. The bogie deflection can be corrected manually (or automatically) to prevent rail gnawing, thus ensuring sate operation, reducing wearing between wheel and rail, and span service life of crane.
Intelligent control technology
Distributed bus control system is applied, which is clear in structure and easy to maintain. Perfect crane information management system monitors the operation status in real time; Full security devices collects the position, limit, anticollision protection, interlock protection, overload protection grounding protection, and lightning protection of all mechanisms.
Intelligent low voltage capacitor compensation
Full automatic resonance eliminating reactive power compensation device is configured to achieve the average power factor above 0.9 or more, which improves electricity efficiency and reduces wire consumption.
Hybrid drive and energy recovery system
The new RTG uses lithium battery as the power supply of the crane, and potential energy can be recycled automatically when the weight drops. It saves over 65% energy comparing with the full diesel engine power supply. And low emissions, low noise, low maintenance time and cost can be achieved. Energy storage equipment of lithium iron phosphate battery pack is configured for RTG to ensure the stability of power supply and reduce its fluctuation.
The preparation process
Complete processing equipment for steel pretreatment, cutting, bevel cutting, bending forming and other material processing are applied to provide a powerful guarantee on welding quality.
The welding process
As the launching of the first semi-automatic welding assembly line for heavy port machinery, the box beam welding cycle has been shortened by 15%. By applying semi-automatic car welding of H-beam, the welding cycle of stay bar system and M-house base has been shortened by over 30%. Large structures including boom and girder can be welded complete in the factory, and the UT qualification rate is over 99%.
Delilvery cycle
The whole delivery cycle of RTG (from receiving order to delivery status) is above average in the industry. The manufacture cycle (from material preparation to delivery status) is currently shortened by 20 days than previously
Product Parameter
Type:Rubber Tyre
Hoisting Capacity Under Spreader:40T
Rail Span:23.47m
Wheel Quantity:16
Hoisting Height:21.2m
Hoisting Speed(Full Load):25M/Min
Hoisting Speed(Empty Load):50M/Min
Gantry Speed(Full Load):50M/Min
Gantry Speed(Empty Load):130M/Min
Trolley Speed:70M/Min
Rotation Angle Of Spreader:±5°
Power Supply:diesel generator
