SANY SR405R-W10 Rotary drilling rig
Product Feature
Strong into the rock:Adopt the new sixth-generation 580 drill pipe,Integral pressurization table、Material upgrade、Design of reinforcing ring, etc.,Strength increased by 25%。Strong impact resistance,Pressurization Lift 15%,Rock-entering capacity increased by 25%;Five machine locking rods can drill up to 88 meters deep in hard rock.。
Economical and energy-saving:By collecting big data statistics, the average comprehensive fuel consumption is lower than that of the same level models in the industry.,Annual fuel savings 6~120,000 yuan。
Be flexible:Large rotary excavation with parallelogram structures,Flexible transition,Meet the installation requirements of restricted sites。
High reliability:The design standard of the whole machine is high,Design life of structural members>20000 hours。
Innovative technology:
High-definition touch screen display,Refresh frequency 3ms,No visual delay。
Pressurization table display function,It can accurately display and guide the locking of the drill pipe pressurization platform.、Unlock,Reduced drill pipe wear,Liminate rod jamming accident,SANY has patented technologies with intellectual property rights。
Cone automatic drilling function,Fixed rotating speed of power head can be set,Realize automatic cutting and drilling。
Wire rope pre-tensioning technology,The wire rope of the main winch shall always maintain a certain pre-tensioning force.,Avoid tangling the rope、Twist。
Yiweixun exclusive mobile phoneAPP,Realize remote equipment monitoring、The service is called by one key。
And that maintenance convenience is good:Automatic centralized lubrication as standard;Overlapping adjustment-free counterweight, etc.,And that disassembly time is reduce,And that transfer efficiency is improve。
Product Parameter
Drilling |
|
Maximum borehole diameter |
(Not matched/Equipped with casing)2500/2200mm |
Maximum drilling depth(Friction Rod/Machine Lock Lever) |
106/87m |
Power head |
|
Rated output torque |
405kN·m |
Rotating speed |
5-25rpm |
Pressurized system |
|
Apply pressure |
350kN |
Pulling force |
400kN |
Travel |
10000mm |
Main winch |
|
Lifting power |
400kN |
Wire rope diameter |
36mm |
Maximum speed |
75m/min |
Auxiliary winch |
|
Lifting power |
105kN |
Wire rope diameter |
20mm |
Maximum speed |
70m/min |
Mast inclination |
|
Front/After |
4/90° |
Left/Right |
±3° |
Chassis |
|
Engine model |
ISUZU 6WG1 |
Engine power |
377/1800KW/rpm |
Discharge |
COMⅢ |
Displacement |
15.68L |
Total chassis length |
7800mm |
Chassis spread width |
3500-4900mm |
Track width |
800mm |
Tail radius of gyration |
4600mm |
Host |
|
Height of complete machine |
27700mm |
Operating weight |
131t |
Transport width |
3530mm |
Transport height |
3660mm |