XCMG XTR6/320 Coal Cutter
Product Feature
The cutting head is designed for hard rock condition,and the arrangement of picks on it is reasonable.It makes the machine has stronger rock breaking capacity, high cutting efficiency and low consumption rate of picks.
The machine is equipped with remote control system,it improves the level of intelligent control.
External spraying adopts double trapezoid angle structure and three layer of water curtain partition,all these make the range bigger of spraying and the effect better of dust suppression.
The hydraulic system adopts constant power, load sensitive control,which is good for energy saving and environmental protection. The bypass filter and high pressure filtration technology guarantee the reliability of machine operation,they improve the service life of hydraulic components significantly.
Product Parameter
| Project | Unit | Parameter |
| Total weight | (kg) | 120000 |
| Overall dimension | ||
| Total length without additional conveyor) | (mm) | 15000 |
| Total width Ramp plate | (mm) | 3800 |
| Total width Aggregat | (mm) | － |
| Total width Main frame | (mm) | 3200 |
| Total height The highest point of cutting head for laying horizontally | (mm) | 2900 |
| Total height Main frame | (mm) | 2200 |
| Undercut max telescoping/non-telescoping | (mm) | 280 |
| Ground clearance of machine | (mm) | 290 |
| Height Cutting cross section | (mm) | 6500 |
| Width Cutting cross section | (mm) | 7100 |
| Gantry height | (mm) | 400 |
| Max./Economic compressure strength for cutting coal petrography | (MPa) | ≤130/100 |
| Travel speed | (m/min) | 7/14 |
| Installed power of cutting motor | (kW) | 320 |
| Installed power of pump motor | (kW) | 230 |
| Supply voltage | (V) | AC1140 |
| Line frequency | (Hz) | 50 |
| Loading capacity | (m³/min) | Star wheel type/4.75 |
| Pressure of water spraying | (MPa) | External spraying:2 |
