DEERE 330G Skid Steer Skid Steers

Engine

Final Tier 4 (FT4)/EU Stage IV diesel engine packs plenty of power and torque.

Unique Tri-Cool design resists debris buildup and employs large coolers for standout performance in severe, high-load conditions. Add a reversible fan in high-debris applications for quick core cleanout.

Cab & Controls

Larger entryways with swing-out doors make it easier to get in, get comfortable, and get on with it. Inside, there’s more productivity-enhancing foot- and legroom.

Three-way switchable controls between EH foot, ISO joystick, or H-pattern joystick modes. Includes switchable accelerator/decelerator with right-side foot pedal when operating in ISO or H-pattern joystick-control mode.

Productivity

Add the new 90-in. bucket, available for the 330G and watch productivity soar.

EH Boom Performance Package

Factory-installed performance package offers increased productivity and ease-of-use with the following capabilities:

Return to Dig allows the operator to automatically set the bucket or other attachment to his/her designated ready-to-work position. Return to Carry allows the operator to use joystick detents to automatically reset the boom to a designated ready-to-carry position. Boom Height Kickout allows the operator to pre-select a specific boom height based on truck/hopper height and use joystick detents to automatically stop at a specific height. Electronic Self-Level allows the self-level to work on the boom up and down unlike the hydraulic self-level option that works only on boom up.

Onboard Grade Indication Option

This option, installed in-factory or in the field, provides cross-slope or roll and mainfall slope or pitch of the machine within the in-cab monitor display.

Easy-to-use Real-time interface Roll and pitch viewable as either “absolute” or “relative” values Roll and pitch viewable in either degrees or percent

Vertical-Lift Boom

The vertical-lift boom offers more lift height and reach at the top of the lift path, for more stability and truck-loading ability.

Hydraulic Boost

Increased auxiliary hydraulic flow and power enable the 330G and 332G to make the most of an even broader range of attachments.

Easy Maintenance

Swing open the rear door and tilt up the hood for convenient ground-level access to dipsticks, fuel- and fluid-filler necks, and filters.

DESCRIPTION

Lift Geometry	Vertical
Fleet Management	Yes
Precision Guidance	No
Proximity Guidance	No

DRIVELINE

Engine Manufacturer	Yanmar
Engine Model	4TNV94FHT
Emission Rating	Tier 4
Aspiration	Turbo. Intercooled
Displacement, ltr (Inches³)	3.1 (186.3)
Rated Engine Speed, rpm	2500
SAE Net Power, kW (hp)	66 (88.5)
SAE Gross Power, kW (hp)	68 (91.2)
Max. Gross Torque, Nm (lbf / ft)	382 (281.8)
Drive Chain Rating [ANSI]	100 - HD
Tire size - Standard	14 x 17.5 - 12 PR Extra Wall

DIMENSIONS

Length - No Bucket, mm (inches)	3100 (122)
Length - With Bucket Foundry, mm (inches)	3710 (146)
Width - No Bucket, mm (inches)	1980 (78)
Overall Height, mm (inches)	2190 (86.3)
Ground Clearance, mm (inches)	250 (9.7)
Wheelbase, mm (inches)	1270 (49.9)
Rear Departure Angle, °	29
Height to Hinge Pin, mm (inches)	3350 (132)
Dump Angle, °	48
Dump Height - Maximum Foundry, mm (inches)	2690 (106.1)
Reach - Max Dump Height Foundry, mm (inches)	710 (28)
Rollback - Ground Level, °	35

CAPACITIES

Fuel Tank, ltr (gallons (US))	96.5 (25.5)

PERFORMANCE

Rated Operating Capacity - Optional Counterweight Foundry, kg (lbs)	1430 (3150)
Rated Operating Capacity - Foundry, kg (lbs)	1362 (3000)
Tipping Load - Foundry, kg (lbs)	2724 (6000)
Axle Torque - Maximum, Nm (lbf / ft)	8480 (6235)
Speed - Maximum, kph (mph)	19.3 (12)
Breakout - Lift Foundry, kN (lbf)	31.1 (7000)
Breakout - Bucket Foundry, kN (lbf)	45.8 (10300)
Hydraulic Power, kW (hp)	31.402 (42.1)
Hydraulic Power - Option, kW (hp)	54.168 (72.6)
Pump Output, lt/min (gallons (US) / min)	80 (23.5)
Pump Flow - Option, lt/min (gallons (US) / min)	138 (36.5)
System Pressure, bar (PSI)	237.87 (3450)

WEIGHTS

Operating Weight - Foundry, kg (lbs)	4495 (9900)