GEHL R135 Skid Loaders
Height to Hinge Pin - Fully Raised (mm):
108.1" (2746)
Rated Operating Capacity (kg):
1,050 lbs. (476)
Net Power (kW):
33.1 hp (24.7)
Product Feature
The R135 features a new, state-of-the-art, fully-adjustable operator's cab.
- Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
- A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
- Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
- Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
- Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
- Three control options include T-Bar and Hand/Foot.
- All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
The R135 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.
- Automatic glow plug heating system provides superior cold-weather starting.
- After treatment meets all Tier IV requirements through proven technology.
The R135 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Excellent service access and quality components pair up to provide durable machines that are easy to maintain.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
- All-new swing-out cooler provides improved access to the engine bay area.
- Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
- All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
- Removable plate for easy cleanout of foot area inside ROPS/FOPS
Product Parameter
Net Power (kW) | 44.5 hp (33) |
Maximum Torque (Nm) | 107.8 ft.-lbs. (146) |
Rated Operating Capacity (kg) | 1,350 lbs. (612) |
Make | Yanmar |
Model | 4TNV88C-KMS |
Net Power (kW) @ rpm | 46.3 hp (34.5) @ 2800 |
Maximum Torque (Nm) @ rpm | 107.8 ft.-lbs. (146 Nm) @ 1820 |
Displacement (L) | 133.6 cu.in. (2.19) |
Auxiliary Hydraulics - Standard (L/min) | 17 gpm (64.4) |
High-Flow Auxiliary Hydraulics - Option (L/min) | N/A |
Reservoir Capacity (L) | 10 gal. (37.9) |
A | Bale Movers |
B | Brooms |
C | Grapples |
D | Pallet Forks |
E | Mower, Rotary |
F | Skeleton Rock Bucket |
G | Stump Grinders |
H | Tree Puller/Grabbing Tool |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 143.9" |
B Height to Hinge Pin - Fully Raised | 109.6" |
C Overall Height to Top of ROPS | 75.1" |
D Overall Length with Bucket | 120.3" |
E Dump Angle at Full Height | 40° |
F Dump Height | 82.6" |
G Dump Reach at Full Height | 22.7" |
J Rollback at Ground | 29° |
M Rollback Angle at Full Height | 82° |
O Seat to Ground Height | 33.3" |
P Wheelbase | 37.6" |
Q Overall Width - Less Bucket A | 52.6" |
R Bucket Width | 54" |
S Ground Clearance to Chassis | 7.9" |
V Overall Length - Less Bucket | 92.2" |
W Departure Angle | 25° |
X Clearance Circle – Front w/ Bucket | 72.5" |
Y Clearance Circle – Front w/o Bucket | 44.1" |
Z Clearance Circle – Rear | 54" |
Standard Specification Tire Size | 10.00 x 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV88C-KMS Tier IV |
Gross Power @ 2500 rpm | 46.6 hp |
Net Power @ 2500 rpm | 44.5 hp |
Maximum Torque | 107.8 ft.-lbs. @ 1820 |
Displacement | 133.6 cu.in. |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 17 gpm |
High-Flow Auxiliary Hydraulics - Option | N/A |
Reservoir Capacity | 10 gal. |
Electrical System |
|
Battery | 12-volt |
Starter | 12-volt |
Alternator | 100-amp |
Capacities/Weights |
|
Rated Operating CapacityB | 1,350 lbs. |
Rated Operating Capacity with Optional CounterweightB | 1,500 lbs. |
Fuel Tank | 16.5 gal. |
Travel Speed - Maximum | 8.0 mph |
Travel Speed with Two-Speed Option - Maximum | N/A |
Operating WeightC - Approximate | 5,130 lbs. |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 3655 mm |
B Height to Hinge Pin - Fully Raised | 2784 mm |
C Overall Height to Top of ROPS | 1908 mm |
D Overall Length with Bucket | 3056 mm |
E Dump Angle at Full Height | 40° |
F Dump Height | 2098 mm |
G Dump Reach at Full Height | 577 mm |
J Rollback at Ground | 29° |
M Rollback Angle at Full Height | 82° |
O Seat to Ground Height | 846 mm |
P Wheelbase | 955 mm |
Q Overall Width - Less Bucket A | 1336 mm |
R Bucket Width | 1372 mm |
S Ground Clearance to Chassis | 201 mm |
V Overall Length - Less Bucket | 2342 mm |
W Departure Angle | 25° |
X Clearance Circle – Front w/ Bucket | 1842 mm |
Y Clearance Circle – Front w/o Bucket | 1130 mm |
Z Clearance Circle – Rear | 1372 mm |
Standard Specification Tire Size | 10.00 x 16.5 HD |
Engine |
|
Make | Yanmar |
Model | 4TNV88C-KMS Tier IV |
Gross Power @ 2500 rpm | 34.7 kW |
Net Power @ 2500 rpm | 33 kW |
Maximum Torque | 146 Nm @ 1820 |
Displacement | 2.19 L |
Hydraulic System |
|
Auxiliary Hydraulics - Standard | 64.4 L/min |
High-Flow Auxiliary Hydraulics - Option | N/A |
Reservoir Capacity | 37.9 L |
Electrical System |
|
Battery | 950 CCA |
Starter | 3.0 kW |
Alternator | 100-amp |
Capacities/Weights |
|
Rated Operating CapacityB | 612 kg |
Rated Operating Capacity with Optional CounterweightB | 680 kg |
Fuel Tank | 62.5 L |
Travel Speed - Maximum | 12.9 km/hr |
Travel Speed with Two-Speed Option - Maximum | N/A |
Operating WeightC - Approximate | 2327 kg |
Control Patterns |
|
---|---|
Gehl T-Bar Controls - Servo | Optional |
Hand/Foot Controls - Pilot | Optional |
Joystick Controls - Pilot | |
Engine |
|
Engine Auto-Shutdown System | Standard |
Engine Block Heater | Optional |
Naturally-Aspirated Engine | Standard |
Hydraulics |
|
Auxiliary Hydraulics | Standard |
Operator Station |
|
Restraint Bar with Integrated Armrests | Standard |
Heating | Optional |
A/C | Standard |
High-Back Adjustable Seat | Standard |
Suspension Seat - Mechanical | Optional |
Suspension Seat - Air Ride | Optional |
Cab Enclosure | Optional |
Foot and Hand Throttles | Standard |
Full Instrumentation | Standard |
Horn | Standard |
Integral Access Plate (Removable) | Standard |
ROPS/FOPS Level II Overhead Guard | Standard |
Sound Reduction Material | Standard |
Work Lights - Front and Rear | Standard |
Performance |
|
All-Tach® Attachment Mounting System | Standard |
Power-A-Tach® Attachment Mounting System | Optional |
Anti-Vandalism Protection | Standard |
Back-Up Alarm | Optional |
Brake Control (Auto/Manual) | Standard |
Counterweight | Optional |
Hydraglide™ Ride Control | N/A |
Hydraloc™ Safety System | Standard |
Hydrostatic Drive - Servo | Standard |
Lift Arm Support Device | Standard |
Selectable Self-Leveling Hydraulic Lift Action | Optional |