CASE 221F COMPACT WHEEL LOADERS

The 221F Compact Wheel Loader is designed to do more on the job while requiring less from you. A strong, compact frame with Z-Bar linkage improves stability for greater leverage and load control while a new Tier 4 emission solution helps meet emissions regulations without additional maintenance needs. Many other features provide more speed back into the pile, greater precision in close quarters, better material retention and enhanced attachment compatibility thanks to a standard skid steer coupler. All, of course, with the durability you expect from CASE. Productivity With a lower center of gravity and Z-bar linkage, the 221F has improved lifting power and breakout force. The suspension has been enhanced with a 20-degree oscillating rear axle that works independently of the cab for greater operator comfort and load control. High speed axle options provide travel speeds up to 21.8 MPH (35 KM/H), including HS limited slip axles which provides on-demand traction in loose or uneven terrain, Powering the 221F is a gear pump with a choice two flow outputs, standard 85l/min or the High Flow pump producing 130 l/min. The high-flow pump and creep speed transmission are perfectly matched for demanding applications like snow-blowing or cold planning. A proportional loader control gives operators even greater command. Plus, Connect Under Pressure (CUP) manifolds and a hydraulic coupler make switch out quick and easy. Fuel Efficiency The 221F features a maintenance-free Tier 4 emission solution. This means no regeneration downtime, no Diesel Particulate Filters (DPFs) to replace, no extreme exhaust temperatures, no after-treatment fluids to add. Just get in and go. It’s the best match for versatile, on-the-go machines of this size. Comfort and Visibility F Series cab offers more space, greater all-around visibility, and an intuitive control interface to simplify operation. With new Creep Speed, Return-to-Dig and Ride Control™, air suspension seat, and Bluetooth radio options, it’s even easier to maximize productivity throughout the day. LED worklights helps keep production levels high and safe, even in low-light conditions. Serviceability With a tilt-up hood and friendlier access to daily checkpoints, the new F Series Compact Wheel Loaders were redesigned to simplify serviceability. Radiators, filters, hydraulics and the engine are all easily accessible so routine maintenance can be done in a matter of minutes. Tier 4 Final HPCR, EXTERNAL CEGR WITH PM CATALYST Why this solution: This compact and powerful 21F meets emissions regulations with a maintenance-free, non-DPF Tier 4 Final engine solution – another way the new F Series helps you do more while requiring less. How it works: The high-pressure common rail (HPCR) system electronically controls fuel injection for greater fuel economy. Cooled Exhaust Gas Recirculation (CEGR) cools and blends exhaust gasses with fresh air for combustion. This lowers temperatures and dramatically reduces NOx emissions, but produces more particulate matter. The particulate matter is managed by the Particulate Matter Catalyst (PM Catalyst), which is made up of a Diesel Oxidation Catalyst (DOC) and a high-efficiency flow-through filter. The DOC converts emissions into neutral gasses and the filter holds particulate matter while heat from the exhaust burns it off. What this means to you: This solution is maintenance-free, requiring no costly Diesel Particulate Filter (DPF) to maintain/replace and no new fluids to add. Powered by an FPT engine. Base & Extended Warranty Coverage 1 Year / Unlimited Hour Full Coverage Base Warranty Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump. Purchased Protection Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help determine and customize the plan that fits your needs. Plans are available at any month/hour amount on CASE Compact Wheel Loader models. Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

OPERATOR ENVIRONMENT

• Base and Deluxe Cab w/ heater
• Key start
• Articulated power steering w/ tilt column
• Full adjustable cloth suspension seat
• Foot throttle
• Single joystick w/ electronic speed shift control F/N/R switch and proportional loader control
• Cup holder
• Retractable seat belt
• Storage tray on Deluxe Cab
• Sun screen – front, Opening side window
• Dome light
• Wipers – front and rear
• 12-volt auxiliary power
• Lighter cigar and ashtray
• Pocket cellular phone
• Coat hook
• External rearview mirrors
• Loader control lockout
• Electronic information center
• Displays/Gauges:
  • Vehicle speed
  • Hourmeter
  • Floating functionality on
  • Clock
  • Vehicle directions
  • Gear number engaged
  • PM Catalyst icons
• Indicator lights:
  • Main hydraulic enabled
  • Turn light – left and right
  • Rear work lamps
  • Work lamps
  • Main high beam
  • Side lights
  • Stop
  • Warning signal
  • Rabbit
  • Hand brake
  • Brake fluid level
  • Quick coupler on
  • Ride Control on
  • Creep speed
  • PM Catalyst
  • Low fuel level
  • Clogging air filter
  • Engine oil pressure
  • Glow plug
  • Alternator changing
• Audible alarms:
  • Caution alarm
  • Critical alarm
  • Backup alarm
• Horn
• NOTE: If equipped w/ option

ENGINE

• FPT F5H FL463 A*F004
• Fuel filter with water trap
• Dual element air cleaner

LOADER

• Z-Bar:
  • Z-Bar loader linkage
  • Single control for lift and tilt
  • Positive hold float
  • Hydraulic attachment coupler: Skid steer compatible/horizontal pin compatible

DRIVETRAIN

• 4-wheel drive
• Open – front and rear axles
• Hydrostatic transmission
• Single joystick with electronic speed shift control F/N/R switch and proportional loader control
• Outboard planetary axles
• Hydraulic wet disc brakes
• Mechanical parking brake

HYDRAULICS

• Hydraulic remote control
• 3-spool loader control valve
• 3 Diagnostic quick couplers

OTHER

• Front and rear fenders
• Lights:
  • 2 Front driving headlights – high/low beam
  • 2 Rear flood lights
  • 2 Stop tail lights and backup light
  • Front and rear turn signal/flash
• Drawbar pin
• Articulation locking pin
• Tie-down and Lift-up point – front and rear
• Backup alarm
• Wired for radio
• Bucket position indicator