Product Feature
1. The JGM757-II reinforced front loader has large lifting and breakout force for the single rocker arm Z-form reversal mechanism and optimized working device.
2. The high efficient dual pump confluence hydraulic system saves energy and has good dynamic property.
3. The single-stage 4-element twin turbine torque converter with decreased gear number matches with the transmission gearbox and engine well enough to enable large traction force.
4. The product is configured with our 50 heavy duty drive axle. It has ultra long wheel base, large bearing capacity and good stability.
5. The centring arrangement for the articulated position and small turning radius make the reinforced front loader have high mobility and flexibility.
6. The key parts and components of the product are analyzed through the finite element analysis method.
7. The product is designed with the front and rear tyres' tracks overlapped. The tyres have long service lifetime.
8. The full hydraulic coaxial flow amplifying steering system comes into service to enable handy and flexible steering with reliable operation.
Selectable Unit
1. Dongkang 6CTA8.3 or Weichai Standard Landking Generation II Engine
2. High-level Driver's Seat (including armrest, headrest and safety belt)
3. High Dumping Bucket, Extra Large Coal Bucket, Rock Bucket and Other Kinds
4. Cooling or the Heating and Cooling Air Conditioner
5. Meritor Drive Axle
6. Automatic Weighing Device
7. Pilot Control
8. Automatic Centralized Lubrication
Standard Facility
1. Weichai Low Speed Engine of Landking Generation II for the Reinforced Front Loader
2.Air-over-oil Caliper Disc Service Brake System and Pneumatically Controlled Clamp Type Parking Brake System
3. Single-stage 4-element Twin Turbine Torque Converter
4. Standard Tyre with the Specification of 23.5-25-16PR
5. Planetary Hydraulic Shift Transmission Gearbox
6. Jingong 50 Reinforced Drive Axle
7. Standard Boom Arm and Standard Bucket
Product Parameter
| Item | Parameter | Unit | |
| Operating Weight | 17300 | kg | |
| Rated Load | 5000 | kg | |
| Bucket Capacity | 2.7 | m³ | |
| Dumping Height | 3100 | mm | |
| Dumping Reach | 1220 | mm | |
| Max. Traction Force | ≥160 | KN | |
| Max. Breakout Force | ≥170 | KN | |
| Overall Dimension (L×W×H) | 7782×2990×3410 | mm | |
| Boom Lifting Time | ≤6.3 | s | |
| Total Cycling Time | ≤12 | s | |
| Wheel Base | 3230 | mm | |
| Min. Turning Radius (Outer Edge of Bucket) | 7050 | mm | |
| Rated Power | 162 | kW | |
| Travelling Speed | Forward Gear I | 0-11.5 | km/h |
| Forward Gear II | 0-36 | km/h | |
| Reverse Gear I | 0-16 | km/h | |
| Fuel Tank Capacity | 230 | L | |
| Hydraulic Oil Tank Capacity | 270 | L | |
| No. | Item | Standard Bucket | Coal Bucket | Extra Large Bucket | Unit |
| 1 | Bucket Capacity | 2.7 | 3.6 | 4.5 | m³ |
| 2 | Rated Load | 5000 | 5000 | 5000 | kg |
| 3 | Operating Weight | 17590 | 17948 | 18062 | kg |
| 4 | Dumping Height | 3520 | 3390 | 3300 | mm |
| 5 | Dumping Reach | 1430 | 1490 | 1575 | mm |
| 6 | Overall Length | 8325 | 8265 | 8385 | mm |
| 7 | Min. Turning Radius (Outer Edge of Bucket) | 7160 | 7130 | 7190 | mm |
| Note: The technical progress would give rise to the change of the structure and parameters of the product without prior notice. If the above description doesn't coincide with the actual product, the actual product shall prevail. | |||||
