SANY SW405K Loader
Rated Load:
5000kg
Rated Power:
195/1800 kW/rpm
Bucket Capacity:
3.0 m³
Product Feature
Customized DANA transmission:
The DANA axis-shift transmission with electronic control system is used for automatic shifting, maximum efficiency and 10k-hour service life.
F/R handle and fingertips control realize ease of switch between left and right hands.
Solenoid valve + logic control achieve a much smoother shifting and faster response.
High-pressure load-sensitive hydraulic system:
Perfect match between speed and power, 10%-15% energy saving.
The 25MPa high-pressure hydraulic system and main valve of large displacement achieves higher breakout and lifting force.
Reinforced structural components:
For heavy-duty mining applications with a service life reaching 10k hours.
Product Parameter
Model | DEUTZ TCD7.8L6 |
Power | 170/1800 kW/rpm |
Torque | 962 ft lbs/1304Nm/1450rpm |
No. of cyliners | 6 |
Displacement | 7.8L |
Bore x Stroke | 110mm x 136mm |
Hydraulic System Type | Load sensing hydraulic system |
Pump | Implement - Kawasaki Steering - Eaton/Danfoss |
Max. flow | 81 GPM / 132L/min @ 2200rpm |
System pressure | 3916 PSI / 27MPa |
Cycle time | 10.6 s |
Gear-shift model | Automatic, Manual, KD |
Travel speed | forward 4.4/8/16/25 mph, reverse 4.4/8/16 mph |
Service brakes | Wet Disk |
Parking brake | SAHR Disk Brake |
Height to axle centerline | 440mm |
Centerline of rear axle to edge of counterweight | 2330mm |
Wheelbase | 3200mm |
Centerline of rear axle to hitch | 1600mm |
Shipping length | 6862/8142mm |
Max. dump height | 5441mm |
Hinge pin height at max.lift | 4133mm |
Dump clearance at max.lift | 3118mm |
The lowest dump to the ground | 56mm |
Reach at max.lift and 45° discharge | 1140mm |
Rack back at max.lift | 58° |
Dump angle at max.lift | 45° |
Rack back at carry height | 51° |
Rack back at ground | 45° |
Tail angle to the rear wheel | 27° |
Clearance circle to outside of tires | 5800mm |
Clearance circle to counterweight | 5911mm |
Max.circle | 6456mm |
Bucket width | 2975mm |