SANY SW956E Electric Loader
Product Feature
High efficiency
High-power permanent magnet synchronous motor is used in the traveling system,Instantaneous torque 2400Nm,Powerful、Efficient
The whole machine adopts intelligent control system.,Depending on the load、Automatic adjustment of power output under vehicle speed and other conditions,The dynamic response is fast,High efficiency
Long endurance
Carry 282KwhBattery,The energy density is high,Endurance lasts longer
Double Gun Charging 400A,Charge for 1 hour,Up to 8 hours of endurance
Maximum motor efficiency over 95%,Let every-Electricity is really used in work.
With energy recovery system,The whole machine is sliding、When braking and shifting gears,Automatic energy recovery,The average energy feedback can reach 20%
Low cost
The hourly energy use cost is about 70 yuan lower than that of the fuel loader.,Save 20% a year+Ten thousand yuan
EIC system is free of maintenance for life, -The annual maintenance cost is about 10,000 yuan.
Reduce carbon emissions by about 130 tons a year,The value of carbon emission trading is about 6000 yuan.
Safe and reliable
Double-pipeline full-hydraulic brake,High braking sensitivity,The hydraulic oil is circulated for cooling,Eliminate brake failure due to thermal attenuation,Safer
Adopt heavy-duty mature 6-ton structural part platform,Large span and long wheelbase design,Full-turn tipping load≥120kN,The load distribution is reasonable,And that stability is high,Meet the requirements of various heavy-duty working conditions
Three-electricity integrated intelligent temperature control system,Integrated heating and water cooling,Easy to deal with extreme cold、Extreme thermal conditions
Excellent service
1187 service outlets and 28 spare parts centers have been established throughout the country.
7000+Service personnel,Sany Institute of Technology Directional Training of New Energy Vehicle Technical Service Personnel,Cultivate a more professional service team
Product Parameter
Technical parameters |
Unit |
SW956E |
Rated load capacity |
kg |
5500 |
Quality of work |
kg |
18000 |
Overall dimensions of the complete machine |
mm |
8765*2960*3560 |
Wheel track |
mm |
2200 |
Wheelbase |
mm |
3400 |
Standard bucket capacity |
m3 |
3.5 |
Boom breakout force |
KN |
175 |
Traction |
KN |
167 |
Tipping load(Straight) |
t |
13.5 |
Three terms and |
S |
10.5 |
F1/R1 |
km/h |
13 |
F2/R2 |
km/h |
40 |
Minimum Turning Radius |
mm |
6350 |
Maximum lifting height |
mm |
5540 |
Minimum ground clearance |
mm |
410 |
Maximum climbing angle |
° |
28 |
Dump height |
mm |
3400 |
Unloading distance |
mm |
1220 |
Charging time |
h |
≤1 |
Endurance |
h |
6-8 |